HR204
Controls condensation and odours
Up to 70% heat recovery
Balanced supply and extract air flows
Eliminates mould growth
Prevents noise ingress
Reduces maintenance costs
This unit is a residential mechanical ventilation unit with high efficiency heat recovery that provides continuous extraction of stale air from the dwelling typically from the bathroom and kitchen. As the unit is a compact design it can be easily located in a kitchen cupboard, airing cupboard etc. when space is at a premium. The HR204 prevents noise ingress and eliminates mould growth.
Performance of HR204: Up to 185m3/h FID capacity (balanced airflow). Designed for use in apartments, flats and smaller dwellings and in particular those inner-city sites where noise ingress is a problem.
Installation
The unit is designed for fitting in confined spaces the HR204 requires a flat vertical area 1335mm high x 600mm wide for installation. The exhaust duct must pass through an outside wall or roof and discharge to atmosphere in a suitable position. The clean air inlet duct must pass through an outside wall or roof and be suitably positioned to provide an adequate fresh air supply from atmosphere.
PERFORMANCE:
The MVHR unit has five normal fan speed settings and one boost setting. The performance curve chart gives the ventilation rates at each fan speed setting compared to the pressure drop of the system
HR204 to be used with an Integral Transformer for maximum controllabilty
| Motor Speed | 1 | 2 | 3 | 4 | 5 | 6 |
| Volume m³/h (FID) | 60 | 80 | 100 | 120 | 140 | 185 |
DIMENSIONS:
Weight: 20.60kg
| Power | Consumption | |
| Speed 1 | 80V | 16W |
| Speed 2 | 100V | 27W |
| Speed 3 | 120V | 40W |
| Speed 4 | 140V | 52W |
| Speed 5 | 160V | 65W |
| Speed 6 | 240V | 111W |
Using the Vent-Axia LoWatt range can reduce electrical consumption, thus reducing the overall carbon footprint. Additional SavingsWhen using heat recovery ventilation, the heating system requirement is reduced thus potentially saving another 500kg of carbon per annum. This unit is a residential mechanical ventilation unit with high efficiency heat recovery that provides continuous extraction of stale air from the dwelling typically from the bathroom and kitchen. As the unit is a compact design it can be easily located in a kitchen cupboard, airing cupboard etc. where space is at a premium. The LoWatt HR204 prevents noise ingress and eliminates mould growth. The Vent-Axia LoWatt HR204 meets the latest requirements of the Building Regulations Document F 2006 for wholehouse system ventilation. Performance of LoWatt HR204: Up to 185m3/h FID capacity (balanced airflow). Designed for use in apartments, flats and smaller dwellings and in particular those inner-city sites where noise ingress or pollution is a problem.
Raadpleeg de tab Downloads voor technische informatie
ESTIMATED RUNNING COSTS
Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model
Based on the inputted figures, estimated running costs would be:
Overview
This unit is a residential mechanical ventilation unit with high efficiency heat recovery that provides continuous extraction of stale air from the dwelling typically from the bathroom and kitchen. As the unit is a compact design it can be easily located in a kitchen cupboard, airing cupboard etc. when space is at a premium. The HR204 prevents noise ingress and eliminates mould growth.
Performance of HR204: Up to 185m3/h FID capacity (balanced airflow). Designed for use in apartments, flats and smaller dwellings and in particular those inner-city sites where noise ingress is a problem.
Installation
The unit is designed for fitting in confined spaces the HR204 requires a flat vertical area 1335mm high x 600mm wide for installation. The exhaust duct must pass through an outside wall or roof and discharge to atmosphere in a suitable position. The clean air inlet duct must pass through an outside wall or roof and be suitably positioned to provide an adequate fresh air supply from atmosphere.
Technical
PERFORMANCE:
The MVHR unit has five normal fan speed settings and one boost setting. The performance curve chart gives the ventilation rates at each fan speed setting compared to the pressure drop of the system
HR204 to be used with an Integral Transformer for maximum controllabilty
| Motor Speed | 1 | 2 | 3 | 4 | 5 | 6 |
| Volume m³/h (FID) | 60 | 80 | 100 | 120 | 140 | 185 |
DIMENSIONS:
Weight: 20.60kg
| Power | Consumption | |
| Speed 1 | 80V | 16W |
| Speed 2 | 100V | 27W |
| Speed 3 | 120V | 40W |
| Speed 4 | 140V | 52W |
| Speed 5 | 160V | 65W |
| Speed 6 | 240V | 111W |
Models
Using the Vent-Axia LoWatt range can reduce electrical consumption, thus reducing the overall carbon footprint. Additional SavingsWhen using heat recovery ventilation, the heating system requirement is reduced thus potentially saving another 500kg of carbon per annum. This unit is a residential mechanical ventilation unit with high efficiency heat recovery that provides continuous extraction of stale air from the dwelling typically from the bathroom and kitchen. As the unit is a compact design it can be easily located in a kitchen cupboard, airing cupboard etc. where space is at a premium. The LoWatt HR204 prevents noise ingress and eliminates mould growth. The Vent-Axia LoWatt HR204 meets the latest requirements of the Building Regulations Document F 2006 for wholehouse system ventilation. Performance of LoWatt HR204: Up to 185m3/h FID capacity (balanced airflow). Designed for use in apartments, flats and smaller dwellings and in particular those inner-city sites where noise ingress or pollution is a problem.
Downloads
Related Products
Useful links
-
Trade Counter
Click here -
Brochures
Click here -
Legislation
Click here -
Contact Us
Click here -
About Us
Click here -
Downloads
Click here