In-Line Smoke Fans (ILHT)

This product range is now obsolete and no longer available from Vent-Axia. The information here is provided for reference only.

The ILHT range of direct drive in-line fans is designed to withstand the extract of air streams (only air stream within fan enclosure) of 400°C for a minimum period of two hours. All models are supplied with the motor located out of the air stream mounted on the external face of the casing.

All models are certified for 400°C/2hr for the purpose of extracting hot smoke in the case of a fire. The ILHT series of centrifugal in-line fans offers a truly flexible solution to installation whereby the configuration of both the inlet and discharge ports can be changed by simply altering the positioning of casing side panels.

Certified to EN12101-3 Standards.

Applications
The ILHT Series is suitable for a wide variety of applications including commercial kitchen and car park extract ventilation systems.

Casing
The casing of the ILHT fans is manufactured from high grade robust galvanised steel and are suitable for direct connection in-line with standard nominal rectangular steel ducting. Due to the flexible design and configuration the ILHT units can be installed in any position, both horizontal or vertical, and are suitable for both indoor and outdoor mounted installations.

Impeller
All ILHT fans incorporate a centrifugal backward curved impeller manufactured from high grade galvanised steel. The motor is directly coupled to the impeller which is dynamically balanced.

Motor
All motors are designed for continuous operation in ambient air temperatures up to +70°C and are manufactured in accordance with European CEI standards.

The following motor specification include:

- Single speed models available with 230V or 400V 50Hz Three Phase motors.
- Two speed models available with 400V 50Hz ThreePhase motors.
- All motors are Class F, IP-55

General Performance Characteristics
The range consists of 8 unit sizes, covering an airflow range up to 5.2m³/s

Accessories
A full range of accessories is available to compliment the fan including:

- Discharge Protection Grille
- Flexible Connections
- Motor Cover (external application)
- Mounting Support

PERFORMANCE:

Airflow tested in accordance with:
BS848 Part 1
AMCA 210-85
ASHRAE 51-1985
UNE 100-212-89

DIMENSIONS:

Type A B C D E L M N P Q Weight (kg)
035 700 600 780 850 675 727 927 1038 1122 928 70
050 700 600 780 850 675 727 927 1038 1122 928 90
060 800 700 880 950 775 827 1027 1182 1266 1028 110
065 800 700 880 950 775 827 1027 1182 1266 1028 135
085 900 800 1015 1085 875 962 1162 1330 1414 1175 145
110 900 800 1015 1085 875 962 1162 1330 1414 1175 160
140 1000 900 1115 1185 975 1062 1262 1430 1514 1275 175
190 1100 1000 1215 1315 1075 1162 1362 1530 1614 1375 210
Horizontal
---
Type A B C D E K L M N P Q Weight (kg)
035 700 600 780 850 675 722 587 787 1038 1122 928 70
050 700 600 780 850 675 722 587 787 1038 1122 928 90
060 800 700 880 950 775 822 687 887 1182 1266 1028 110
065 800 700 880 950 775 822 687 887 1182 1266 1028 110
085 900 800 1015 1085 875 934 822 1022 1330 1414 1175 145
110 900 800 1015 1085 875 934 822 1022 1330 1414 1175 145
140 1000 900 1115 1185 975 1034 922 1122 1430 1514 1275 175
190 1100 1000 1215 1315 1075 1134 1022 1222 1530 1614 1375 210
Vertical

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

The ILHT range of direct drive in-line fans is designed to withstand the extract of air streams (only air stream within fan enclosure) of 400°C for a minimum period of two hours. All models are supplied with the motor located out of the air stream mounted on the external face of the casing.

All models are certified for 400°C/2hr for the purpose of extracting hot smoke in the case of a fire. The ILHT series of centrifugal in-line fans offers a truly flexible solution to installation whereby the configuration of both the inlet and discharge ports can be changed by simply altering the positioning of casing side panels.

Certified to EN12101-3 Standards.

Applications
The ILHT Series is suitable for a wide variety of applications including commercial kitchen and car park extract ventilation systems.

Casing
The casing of the ILHT fans is manufactured from high grade robust galvanised steel and are suitable for direct connection in-line with standard nominal rectangular steel ducting. Due to the flexible design and configuration the ILHT units can be installed in any position, both horizontal or vertical, and are suitable for both indoor and outdoor mounted installations.

Impeller
All ILHT fans incorporate a centrifugal backward curved impeller manufactured from high grade galvanised steel. The motor is directly coupled to the impeller which is dynamically balanced.

Motor
All motors are designed for continuous operation in ambient air temperatures up to +70°C and are manufactured in accordance with European CEI standards.

The following motor specification include:

- Single speed models available with 230V or 400V 50Hz Three Phase motors.
- Two speed models available with 400V 50Hz ThreePhase motors.
- All motors are Class F, IP-55

General Performance Characteristics
The range consists of 8 unit sizes, covering an airflow range up to 5.2m³/s

Accessories
A full range of accessories is available to compliment the fan including:

- Discharge Protection Grille
- Flexible Connections
- Motor Cover (external application)
- Mounting Support

Technical

PERFORMANCE:

Airflow tested in accordance with:
BS848 Part 1
AMCA 210-85
ASHRAE 51-1985
UNE 100-212-89

DIMENSIONS:

Type A B C D E L M N P Q Weight (kg)
035 700 600 780 850 675 727 927 1038 1122 928 70
050 700 600 780 850 675 727 927 1038 1122 928 90
060 800 700 880 950 775 827 1027 1182 1266 1028 110
065 800 700 880 950 775 827 1027 1182 1266 1028 135
085 900 800 1015 1085 875 962 1162 1330 1414 1175 145
110 900 800 1015 1085 875 962 1162 1330 1414 1175 160
140 1000 900 1115 1185 975 1062 1262 1430 1514 1275 175
190 1100 1000 1215 1315 1075 1162 1362 1530 1614 1375 210
Horizontal
---
Type A B C D E K L M N P Q Weight (kg)
035 700 600 780 850 675 722 587 787 1038 1122 928 70
050 700 600 780 850 675 722 587 787 1038 1122 928 90
060 800 700 880 950 775 822 687 887 1182 1266 1028 110
065 800 700 880 950 775 822 687 887 1182 1266 1028 110
085 900 800 1015 1085 875 934 822 1022 1330 1414 1175 145
110 900 800 1015 1085 875 934 822 1022 1330 1414 1175 145
140 1000 900 1115 1185 975 1034 922 1122 1430 1514 1275 175
190 1100 1000 1215 1315 1075 1134 1022 1222 1530 1614 1375 210
Vertical

Downloads

Related Products

Useful links