Lo-Carbon Multivent
• Reduces your carbon footprint
• EC low energy consumption motors
• Fitted with four extract 125mm diameter spigots allowing quick
connection to ducts
• Option of wall, ceiling and loft mounting
• Quiet running suitable for continuous operation
• Can extract from a number of rooms, depending on the
dwelling
• Wireless Controller available
The Lo-Carbon Multivent continuous mechanical extract ventilation range is designed for the simultaneous ventilation of separate areas in the home or as a multipoint extractor system for a wide range of commercial applications.
In the home the system is usually located in the loft or airing cupboard with ducts taken to the bathroom, kitchen and utility room to remove water vapour at source and from toilets to remove odours.
Lo-Carbon Multivent is ideal for a range of commercial applications such as toilets, fitting rooms, and kiosk’s. The units can be installed at any angle and where the ambient air has a high humidity content condensate drains
are provided.
The Lo-Carbon Multivent H version incorporates a built-in humidity sensor to switch between two of the three speeds. A Wireless Controller is available for use with the Lo-Carbon Multivent H with three speed options offering total control of the system.
Lo-Carbon MVDC
The Lo-Carbon MVDC Multivent minimises running costs by incorporating the latest DC technology. DC efficiency means less wear and tear on the motor which guarantees longer life.
Extended motor guarantee to 5 years offered.
Installation
Multivent is ideal for a range of commercial multipoint extract applications such as WC’s, fitting rooms, and kiosk's.The units can be installed at any angle and where the ambient air has a high humidity content condensate drains are provided.
PERFORMANCE:
Graphs:
DIMENSIONS:
Weight: 5.50kg
Technical Data
|------------------- Settings -------------------|
Low
Medium
High
Current
Amps
Power
Watts
Current
Amps
Power
Watts
Current
Amps
Power
Watts
MVDC
0.1
13
0.23
35
0.39
44
MVDCH
0.1
13
0.23
35
0.39
44
Sound Levels
FID
|------------- dB(A) @ 3m -------------|
Performance m³/h
Casing Breakout
Duct Inlet 100mm Ø
Duct Inlet 125mm Ø
MVDC
low
medium
high
232
365
434
33.3
33.7
38.8
36.3
47.9
51.7
36.5
47.0
51.5
MVDCH
low
medium
high
232
365
434
33.3
33.7
38.8
36.3
47.9
51.7
36.5
47.0
51.5
Published dB(A) figures are free field sound levels at 3m with spherical propagation at a reference level of 2 x 10–5 Pa.The free field sound power level spectra figures are dB with reference of 10–12 Watts.
The Multivent continuous mechanical extract ventilation range is designed for the simultaneous ventilation of separate areas in the home or as a multi-point extractor system for a wide range of commercial applications. In the home the system is usually located in the loft or airing cupboard with ducts taken to the bathroom, kitchen and utility room to remove water vapour at source and from WC's to remove odours. Designed to provide 0.7 of an air change based on the volume of the building, the Multivent system provides adequate ventilation, even in a 'tight' dwelling. Pollutant concentrations and humidity can be controlled. The Multivent H versions are now available with 2 control options. An integral humidity sensor that will detect any rise in humidity within the system and will boost between any 2 of the 3 speeds. A new Wire-less Controller is available for use with the Multivent H with 3 speed options offering total control of the systems. Multivent MV250 and MV350 are guaranteed for 2 years with an extended motor guarantee to 5 years offered on the MVDC LoWatt Energy Saving model.
The Multivent continuous mechanical extract ventilation range is designed for the simultaneous ventilation of separate areas in the home or as a multi-point extractor system for a wide range of commercial applications. In the home the system is usually located in the loft or airing cupboard with ducts taken to the bathroom, kitchen and utility room to remove water vapour at source and from WC's to remove odours. Designed to provide 0.7 of an air change based on the volume of the building, the Multivent system provides adequate ventilation, even in a 'tight' dwelling. Pollutant concentrations and humidity can be controlled. The Multivent H versions are now available with 2 control options. An integral humidity sensor that will detect any rise in humidity within the system and will boost between any 2 of the 3 speeds. A new Wire-less Controller is available for use with the Multivent H with 3 speed options offering total control of the systems. Multivent MV250 and MV350 are guaranteed for 2 years with an extended motor guarantee to 5 years offered on the MVDC LoWatt Energy Saving model.
For reducing noise in sensitive installations.
Raadpleeg de tab Downloads voor technische informatie
ESTIMATED RUNNING COSTS
Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model
Based on the inputted figures, estimated running costs would be:
Overview
The Lo-Carbon Multivent continuous mechanical extract ventilation range is designed for the simultaneous ventilation of separate areas in the home or as a multipoint extractor system for a wide range of commercial applications.
In the home the system is usually located in the loft or airing cupboard with ducts taken to the bathroom, kitchen and utility room to remove water vapour at source and from toilets to remove odours.
Lo-Carbon Multivent is ideal for a range of commercial applications such as toilets, fitting rooms, and kiosk’s. The units can be installed at any angle and where the ambient air has a high humidity content condensate drains
are provided.
The Lo-Carbon Multivent H version incorporates a built-in humidity sensor to switch between two of the three speeds. A Wireless Controller is available for use with the Lo-Carbon Multivent H with three speed options offering total control of the system.
Lo-Carbon MVDC
The Lo-Carbon MVDC Multivent minimises running costs by incorporating the latest DC technology. DC efficiency means less wear and tear on the motor which guarantees longer life.
Extended motor guarantee to 5 years offered.
Installation
Multivent is ideal for a range of commercial multipoint extract applications such as WC’s, fitting rooms, and kiosk's.The units can be installed at any angle and where the ambient air has a high humidity content condensate drains are provided.
Technical
PERFORMANCE:
Graphs:
DIMENSIONS:
Weight: 5.50kg
Technical Data
|------------------- Settings -------------------|
Low
Medium
High
Current
Amps
Power
Watts
Current
Amps
Power
Watts
Current
Amps
Power
Watts
MVDC
0.1
13
0.23
35
0.39
44
MVDCH
0.1
13
0.23
35
0.39
44
Sound Levels
FID
|------------- dB(A) @ 3m -------------|
Performance m³/h
Casing Breakout
Duct Inlet 100mm Ø
Duct Inlet 125mm Ø
MVDC
low
medium
high
232
365
434
33.3
33.7
38.8
36.3
47.9
51.7
36.5
47.0
51.5
MVDCH
low
medium
high
232
365
434
33.3
33.7
38.8
36.3
47.9
51.7
36.5
47.0
51.5
Published dB(A) figures are free field sound levels at 3m with spherical propagation at a reference level of 2 x 10–5 Pa.The free field sound power level spectra figures are dB with reference of 10–12 Watts.
Models
The Multivent continuous mechanical extract ventilation range is designed for the simultaneous ventilation of separate areas in the home or as a multi-point extractor system for a wide range of commercial applications. In the home the system is usually located in the loft or airing cupboard with ducts taken to the bathroom, kitchen and utility room to remove water vapour at source and from WC's to remove odours. Designed to provide 0.7 of an air change based on the volume of the building, the Multivent system provides adequate ventilation, even in a 'tight' dwelling. Pollutant concentrations and humidity can be controlled. The Multivent H versions are now available with 2 control options. An integral humidity sensor that will detect any rise in humidity within the system and will boost between any 2 of the 3 speeds. A new Wire-less Controller is available for use with the Multivent H with 3 speed options offering total control of the systems. Multivent MV250 and MV350 are guaranteed for 2 years with an extended motor guarantee to 5 years offered on the MVDC LoWatt Energy Saving model.
The Multivent continuous mechanical extract ventilation range is designed for the simultaneous ventilation of separate areas in the home or as a multi-point extractor system for a wide range of commercial applications. In the home the system is usually located in the loft or airing cupboard with ducts taken to the bathroom, kitchen and utility room to remove water vapour at source and from WC's to remove odours. Designed to provide 0.7 of an air change based on the volume of the building, the Multivent system provides adequate ventilation, even in a 'tight' dwelling. Pollutant concentrations and humidity can be controlled. The Multivent H versions are now available with 2 control options. An integral humidity sensor that will detect any rise in humidity within the system and will boost between any 2 of the 3 speeds. A new Wire-less Controller is available for use with the Multivent H with 3 speed options offering total control of the systems. Multivent MV250 and MV350 are guaranteed for 2 years with an extended motor guarantee to 5 years offered on the MVDC LoWatt Energy Saving model.
Accessories
For reducing noise in sensitive installations.
Downloads
Related Products
Useful links
-
Trade Counter
Click here -
Brochures
Click here -
Legislation
Click here -
Contact Us
Click here -
About Us
Click here -
Downloads
Click here