Cooker Hoods
• A choice of four styles for domestic applications
• Wall, ceiling or cabinet fixed
• Compatible with flat ducting or Vent-Axia aluminium flexible ducting
• All models are provided with a charcoal filter and washable grease filter as standard
• All models are fitted with mains lead, built-in lighting and choice of 3 speeds
Kitchen Ventilation
Vent-Axia offers a range of cooker hoods for the removal of cooking odours and steam at source in the domestic kitchen. Each model is designed to provide the extraction levels necessary to comply with Building Regulation requirements for kitchens with ducted outlets plus models that provide higher outputs for busier kitchens.
A choice of styles is available to include wall, or cabinet fixed models to provide integrated ventilation in any modular fitted kitchen from a terraced galley kitchen to the most extensive layouts. Models are available that can recirculate or extract with the use of ducting.
The Building Regulations for the mechanical ventilation of kitchens with open-able windows in dwellings require that extractor hoods should be capable of extracting at a rate of 30 l/s (108m3/h).
When used with ducting, the resistance of the entire system should be considered so that the required performance is achieved. Extractor hoods should not be sited where ambient temperatures are likely to exceed +50°C.
Extractor hoods are not suitable for use above an eye level grill. Must be mounted between 65cm and 75cm above the hob. Do not flambé underneath a hood. When frying, NEVER leave the pan unattended in case of fire.
Rimini (500mm width), is a domestic stainless steel chimney extractor hood with an extending chimney to fit varying ceiling heights. With a recirculating facility, the extractor hoods are driven by powerful twin fans to give three speeds with extract rates of 230/290/430m3/h. A washable metal grease filter and charcoal filter are supplied. Finished in stainless steel. 2 x 40 Watt lamps provide light facility. Top exhaust facility. 100 or 125mm dia. exhaust duct spigot. Supply voltage 230-240V/1/50Hz.
Milano (600mm width) is a domestic stainless steel chimney extractor hood with an extending chimney to fit varying ceiling heights. With a recirculating facility, the extractor hoods are driven by powerful twin fans to give three speeds with extract rates of 340/420/460m3/h. A washable metal grease filter and charcoal filter are supplied. Finished in stainless steel. 2 x 40 Watt lamps provide light facility. Top exhaust facility. 100 or 125mm dia. exhaust duct spigot. Supply voltage 230-240V/1/50Hz.
Roma (900mm width) is a domestic stainless steel chimney extractor hood with an extending chimney to fit varying ceiling heights. With a recirculating facility, the extractor hoods are driven by powerful twin fans to give three speeds with extract rates of 340/420/460m3/h. A washable metal grease filter and charcoal filter are supplied. Finished in stainless steel. 2 x 40 Watt lamps provide light facility. Top exhaust facility. 100 or 125mm dia. exhaust duct spigot. Supply voltage 230-240V/1/50Hz.
An extractor hood with flipfront glass visor designed to be wall mounted or mounted beneath a top cabinet. With a recirculating facility, Genova offers three speeds with extract rates of 100/160/220m3/h. Genova is supplied with a washable grease filter and charcoal filter. The motor is mounted on an easy to unlock maintenance bracket. Top exhaust facility. Finished in White. 2 x 40 watt lamps provides light facility. 100mm/125mm exhaust spigot. Supply voltage 230-240V/1/50Hz.
An integrated extractor cooker hood designed to accept a kitchen cupboard door-panel in matching height and finish to existing units.
ISO 45% Coarse (G3) (2 pack). Formally known as G3, this filter will provide the minimum required filtration.
Replacement filter set comprising 2 filters for the Kinetic B, BH, E, V and Cooker Hood units. Installation instructions included.
Replacement filter set comprising 2 filters for the Kinetic Cooker Hoods and HR205.
Raadpleeg de tab Downloads voor technische informatie
ESTIMATED RUNNING COSTS
Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model
Based on the inputted figures, estimated running costs would be:
Overview
Kitchen Ventilation
Vent-Axia offers a range of cooker hoods for the removal of cooking odours and steam at source in the domestic kitchen. Each model is designed to provide the extraction levels necessary to comply with Building Regulation requirements for kitchens with ducted outlets plus models that provide higher outputs for busier kitchens.
A choice of styles is available to include wall, or cabinet fixed models to provide integrated ventilation in any modular fitted kitchen from a terraced galley kitchen to the most extensive layouts. Models are available that can recirculate or extract with the use of ducting.
The Building Regulations for the mechanical ventilation of kitchens with open-able windows in dwellings require that extractor hoods should be capable of extracting at a rate of 30 l/s (108m3/h).
When used with ducting, the resistance of the entire system should be considered so that the required performance is achieved. Extractor hoods should not be sited where ambient temperatures are likely to exceed +50°C.
Extractor hoods are not suitable for use above an eye level grill. Must be mounted between 65cm and 75cm above the hob. Do not flambé underneath a hood. When frying, NEVER leave the pan unattended in case of fire.
Technical
Models
Rimini (500mm width), is a domestic stainless steel chimney extractor hood with an extending chimney to fit varying ceiling heights. With a recirculating facility, the extractor hoods are driven by powerful twin fans to give three speeds with extract rates of 230/290/430m3/h. A washable metal grease filter and charcoal filter are supplied. Finished in stainless steel. 2 x 40 Watt lamps provide light facility. Top exhaust facility. 100 or 125mm dia. exhaust duct spigot. Supply voltage 230-240V/1/50Hz.
Milano (600mm width) is a domestic stainless steel chimney extractor hood with an extending chimney to fit varying ceiling heights. With a recirculating facility, the extractor hoods are driven by powerful twin fans to give three speeds with extract rates of 340/420/460m3/h. A washable metal grease filter and charcoal filter are supplied. Finished in stainless steel. 2 x 40 Watt lamps provide light facility. Top exhaust facility. 100 or 125mm dia. exhaust duct spigot. Supply voltage 230-240V/1/50Hz.
Roma (900mm width) is a domestic stainless steel chimney extractor hood with an extending chimney to fit varying ceiling heights. With a recirculating facility, the extractor hoods are driven by powerful twin fans to give three speeds with extract rates of 340/420/460m3/h. A washable metal grease filter and charcoal filter are supplied. Finished in stainless steel. 2 x 40 Watt lamps provide light facility. Top exhaust facility. 100 or 125mm dia. exhaust duct spigot. Supply voltage 230-240V/1/50Hz.
An extractor hood with flipfront glass visor designed to be wall mounted or mounted beneath a top cabinet. With a recirculating facility, Genova offers three speeds with extract rates of 100/160/220m3/h. Genova is supplied with a washable grease filter and charcoal filter. The motor is mounted on an easy to unlock maintenance bracket. Top exhaust facility. Finished in White. 2 x 40 watt lamps provides light facility. 100mm/125mm exhaust spigot. Supply voltage 230-240V/1/50Hz.
An integrated extractor cooker hood designed to accept a kitchen cupboard door-panel in matching height and finish to existing units.
Accessories
ISO 45% Coarse (G3) (2 pack). Formally known as G3, this filter will provide the minimum required filtration.
Replacement filter set comprising 2 filters for the Kinetic B, BH, E, V and Cooker Hood units. Installation instructions included.
Replacement filter set comprising 2 filters for the Kinetic Cooker Hoods and HR205.
Downloads
Related Products
Useful links
-
Trade Counter
Click here -
Brochures
Click here -
Legislation
Click here -
Contact Us
Click here -
About Us
Click here -
Downloads
Click here