Solo - Centrifugal Bathroom / Toilet Fans
• 100mm high performance centrifugal extract fan for internal bathrooms, toilets and other small rooms
• High performance 24l/s
• Single speed and overrun timer models
• Suitable for wall, ceiling, panel and window mounting
• Built-in washable filter feature
• PIR version also available
• Suitable for use with flat ducting
• Double insulated
• IPX4 rated
The Solo range of high performance centrifugal extract fans from Vent-Axia have been specifically designed for effective ducted ventilation of internal bathrooms, WC's and other small rooms. Finished in White. The Solo range can be used with 100mm diameter smooth bore duct in straight runs equal to 50m, yet still meets the 54m3/h (15 l/s) required by the Building Regulations Document F for ventilation of bathrooms. IP44 Rated.
High air movement capacity and pressure characteristics are the result of a reliable ball bearing shaded pole motor and a unique forward curve impeller developed by Vent-Axia. Detailed attention to airflow management throughout the unit ensures efficient running and quiet operation.
Models are available for surface or recessed mounting directly into standard 100mm diameter ducting. Suitable for panel, wall and ceiling installations and windows up to 25mm thick. For high rise or coastal applications, install through the wall with a Vent Cowl (Stock Ref. No. 56 14 03)
PRODUCT SPECIFICATION:
Electrical
Rear 20mm conduit entry for recessed wiring or side entry grommet for surface wiring. Double insulated appliance.
Enclosure of the electrical components manufactured from flame retardant grade material. Supply voltage 220-240V/1/50Hz.
Window fitting kit Stock Ref. No. 114 61 685A
White wall fitting kit Stock Ref. No. 25 41 02
Brown wall fitting kit Stock Ref. No. 25 41 00
Manufacturers of some fluorescent/low energy lighting systems indicate that these can interfere with other electronic/timing circuits. For reliable operation of these circuits we recommend therefore that a tungsten filament light is used.
PERFORMANCE:
Performance
DIMENSIONS:
To meet IEE Regulations, timer models should be isolated using a 3 pole isolator.
Stock Ref. No. 56 35 18
| A | B | C | D | E | F | G | |
| Fan Dims | 155 | 140 | 36 | 98Ø | 85 | 55 | 60 |
| Transformer | 175 | 90 | 55 | 30 | |||
| Weight 1.35kg |
Raadpleeg de tab Downloads voor technische informatie
ESTIMATED RUNNING COSTS
Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model
Based on the inputted figures, estimated running costs would be:
Overview
The Solo range of high performance centrifugal extract fans from Vent-Axia have been specifically designed for effective ducted ventilation of internal bathrooms, WC's and other small rooms. Finished in White. The Solo range can be used with 100mm diameter smooth bore duct in straight runs equal to 50m, yet still meets the 54m3/h (15 l/s) required by the Building Regulations Document F for ventilation of bathrooms. IP44 Rated.
High air movement capacity and pressure characteristics are the result of a reliable ball bearing shaded pole motor and a unique forward curve impeller developed by Vent-Axia. Detailed attention to airflow management throughout the unit ensures efficient running and quiet operation.
Models are available for surface or recessed mounting directly into standard 100mm diameter ducting. Suitable for panel, wall and ceiling installations and windows up to 25mm thick. For high rise or coastal applications, install through the wall with a Vent Cowl (Stock Ref. No. 56 14 03)
Technical
PRODUCT SPECIFICATION:
Electrical
Rear 20mm conduit entry for recessed wiring or side entry grommet for surface wiring. Double insulated appliance.
Enclosure of the electrical components manufactured from flame retardant grade material. Supply voltage 220-240V/1/50Hz.
Window fitting kit Stock Ref. No. 114 61 685A
White wall fitting kit Stock Ref. No. 25 41 02
Brown wall fitting kit Stock Ref. No. 25 41 00
Manufacturers of some fluorescent/low energy lighting systems indicate that these can interfere with other electronic/timing circuits. For reliable operation of these circuits we recommend therefore that a tungsten filament light is used.
PERFORMANCE:
Performance
DIMENSIONS:
To meet IEE Regulations, timer models should be isolated using a 3 pole isolator.
Stock Ref. No. 56 35 18
| A | B | C | D | E | F | G | |
| Fan Dims | 155 | 140 | 36 | 98Ø | 85 | 55 | 60 |
| Transformer | 175 | 90 | 55 | 30 | |||
| Weight 1.35kg |
Models
Downloads
Related Products
Useful links
-
Trade Counter
Click here -
Brochures
Click here -
Legislation
Click here -
Contact Us
Click here -
About Us
Click here -
Downloads
Click here