Access Pac In-Line fans - PAC

This product range is now obsolete and no longer available from Vent-Axia. The information here is provided for reference only.

At a Glance:

Cuts a third off the height of conventional in-line fans.
Has been designed to produce minimum noise levels for use where quiet operation is required.
Manufactured in galvanised steel, the range has integral anchorage points to allow the fan to be suspended in any plane.
All models are fitted with Standard Thermal Overload Protection.

FAQ's Answered:

Compact design
Fully speed controllable
Low noise levels, duct borne and breakout.
Motors protected to IP44
Motor Insulation Class B
Circular spigots
Manufacture controlled to BS EN ISO 9001
Performance tested to BS 848 Parts 1 & 2

Where round in-line fans just won’t go due to height constraints the Vent-Axia ACCESS PAC is the answer, cutting a third off the height of conventional in-line fans. Available in six sizes.

The casing includes an inclined inlet and bellmouth entry which directs the incoming air to the impeller with minimal turbulence. The result is better air management through the unit, less noise, higher efficiency and an increased performance.

 

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

Where round in-line fans just won’t go due to height constraints the Vent-Axia ACCESS PAC is the answer, cutting a third off the height of conventional in-line fans. Available in six sizes.

The casing includes an inclined inlet and bellmouth entry which directs the incoming air to the impeller with minimal turbulence. The result is better air management through the unit, less noise, higher efficiency and an increased performance.

Technical

 

Downloads

Related Products

Useful links