Lo-Carbon HR25 Solo Plus

This product range is now obsolete and no longer available from Vent-Axia. The information here is provided for reference only.

Reduces your carbon footprint
84% temperature based heat recovery
Up to 90% energy saving
IP24 Rated
Installation can be carried out from within the building
Controls condensation and eliminates mould

Through-The-Wall Mounted Heat Recovery UnitThe Vent-Axia Lo-Carbon HR25 Solo Plus through-the-wall heat recovery units are suitable for fitting through a 152mm (6”) circular hole and are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon HR25 Solo Plus is available with pullcord control.Long Life DC Motor The units are fitted with a 24V DC motor and aresupplied with a state of the art Switch Mode Power Supply (S.M.P.S.). This has the ability to operate at only 2 Watts power consumption on normal setting, offering a 90% energy saving over conventional ACequivalents. A 5m cable is provided for fixed wiring of the unit to the S.M.P.S.Typical InstallationThe Lo-Carbon HR25 Solo Plus P (Pullcord) unit is designed for installation in a 152mm (6”) core drilled hole. All installation can be carried out from inside the building. The units are suitable for external walls up to 310mm thick.Maitenance Apart from removing odours, providing fresh air andrecovering heat, this appliance extracts airborne impurities such as dust, dirt and grease. These gradually build up and detract from the efficiency and appearance of the appliance. To ensure peak performance, the appliance, including the filters and heat exchanger should be cleaned regularly inaccordance with the instructions supplied.

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

Through-The-Wall Mounted Heat Recovery UnitThe Vent-Axia Lo-Carbon HR25 Solo Plus through-the-wall heat recovery units are suitable for fitting through a 152mm (6”) circular hole and are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon HR25 Solo Plus is available with pullcord control.Long Life DC Motor The units are fitted with a 24V DC motor and aresupplied with a state of the art Switch Mode Power Supply (S.M.P.S.). This has the ability to operate at only 2 Watts power consumption on normal setting, offering a 90% energy saving over conventional ACequivalents. A 5m cable is provided for fixed wiring of the unit to the S.M.P.S.Typical InstallationThe Lo-Carbon HR25 Solo Plus P (Pullcord) unit is designed for installation in a 152mm (6”) core drilled hole. All installation can be carried out from inside the building. The units are suitable for external walls up to 310mm thick.Maitenance Apart from removing odours, providing fresh air andrecovering heat, this appliance extracts airborne impurities such as dust, dirt and grease. These gradually build up and detract from the efficiency and appearance of the appliance. To ensure peak performance, the appliance, including the filters and heat exchanger should be cleaned regularly inaccordance with the instructions supplied.

Technical

Downloads

Related Products

Useful links