Airtrak In-Line Centrifugal fans - ACH

This product range is now obsolete and no longer available from Vent-Axia. The information here is provided for reference only.

At a Glance:

Fan housing is manufactured from galvanised steel.
Airtrak Centrifugal models are fitted with an external rotor motor and backward curved impeller assembly for long life and reliability.
Sizes 100 & 125 have plastic a plastic impeller. All other sizes have metal impellers.
Motors are single phase 220-240V/50 Hz.

FAQ's Answered:

Motors protected to IP44
Motor Insulation Class B
Maximum operating temperature 40°C
Standard Thermal Overload Protection
IP54 terminal box
All models speed controllable
Manufacture controlled to BS EN ISO 9001
Performance tested to BS 848 Parts 1 & 2
 

Metal In-Line centrifugal duct fans are available in six sizes providing a selection of air volumes from 0.08m³/s to 0.5m³/s (290m³/h to 1800m³/h) at free air and capable of pressure development up to 700 Pa.

The fan housing is manufactured from galvanised steel. Models are supplied complete with an easy to fit mounting bracket for horizontal or vertical mounting.

Motor / Impellers

Airtrak Centrifugal models are fitted with an external rotor motor and backward curved impeller assembly for long life and reliability. Sizes 100 & 125 have plastic a plastic impeller. All other sizes have metal impellers. Protected to IP44 according to BS EN 60529 and IEC 34-5. Ball bearings are greased for life and designed to run at any angle. Insulation is Class 'B' (from -30°C to +40°C). Manufacture is controlled to BS EN ISO 9001.

Electrical

Motors are single phase 220-240V/50 Hz. Capacitor start and run. An IP54 terminal box is supplied with a 650mm flying lead, 20mm entry and the capacitor is conveniently located in the terminal box. All motors are fitted with Standard Thermal Overload Protection (S.T.O.P).

DIMENSIONS:

Model Øa Øb c d Weight Kg
ACH100-12A 98 243 23 195 3.0
ACH125-12A 122 242 27 197 3.0
ACH150-12A 147 333 23 216 5.0
ACH200-12A 198 333 24 223 5.0
ACH250-12A 248 333 27 206 6.0
ACH315-12A 312 400 25 232 8.0
Image of AirTrak In-Line Centrifugal Duct fan - 100mm Diameter
AirTrak In-Line Centrifugal Duct fan - 100mm Diameter

Specification: 100mm diameter Motor Insulation Class B, protected to IP44 Operating Temperatures from -15°C up to +40°C HOT SPOT Protection Suitable for speed control using electronic or Voltage controller Quality Assurance to BS EN ISO 9001:1994 Performance tested to BS848 Part 1 1980 2 Year Warranty.

Stock Ref. No: ACH100B
This Model no longer available
Image of New AirTrak In-Line Centrifugal Duct fan - 125mm Diameter
New AirTrak In-Line Centrifugal Duct fan - 125mm Diameter
Specification: 125mm diameter Motor Insulation Class B, protected to IP44 Operating Temperatures from -15°C up to +40°C HOT SPOT Protection Suitable for speed control using electronic or Voltage controller Quality Assurance to BS EN ISO 9001:1994 Performance tested to BS848 Part 1 1980 2 Year Warranty.
Stock Ref. No: ACH125B
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of New AirTrak In-Line Centrifugal Duct fan - 150mm Diameter
New AirTrak In-Line Centrifugal Duct fan - 150mm Diameter
Specification: 150mm diameter Motor Insulation Class B, protected to IP44 Operating Temperatures from -15°C up to +40°C HOT SPOT Protection Suitable for speed control using electronic or Voltage controller Quality Assurance to BS EN ISO 9001:1994 Performance tested to BS848 Part 1 1980 2 Year Warranty.
Stock Ref. No: ACH150B
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of New AirTrak In-Line Centrifugal Duct fan - 200mm Diameter
New AirTrak In-Line Centrifugal Duct fan - 200mm Diameter
Specification: 200mm diameter Motor Insulation Class B, protected to IP44 Operating Temperatures from -15°C up to +40°C HOT SPOT Protection Suitable for speed control using electronic or Voltage controller Quality Assurance to BS EN ISO 9001:1994 Performance tested to BS848 Part 1 1980 2 Year Warranty.
Stock Ref. No: ACH200B
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of New AirTrak In-Line Centrifugal Duct fan - 250mm Diameter
New AirTrak In-Line Centrifugal Duct fan - 250mm Diameter
Specification: 250mm diameter Motor Insulation Class B, protected to IP44 Operating Temperatures from -15°C up to +40°C HOT SPOT Protection Suitable for speed control using electronic or Voltage controller Quality Assurance to BS EN ISO 9001:1994 Performance tested to BS848 Part 1 1980 2 Year Warranty.
Stock Ref. No: ACH250B
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of New AirTrak In-Line Centrifugal Duct fan - 315mm Diameter
New AirTrak In-Line Centrifugal Duct fan - 315mm Diameter
Specification: 315mm diameter Motor Insulation Class B, protected to IP44 Operating Temperatures from -15°C up to +40°C HOT SPOT Protection Suitable for speed control using electronic or Voltage controller Quality Assurance to BS EN ISO 9001:1994 Performance tested to BS848 Part 1 1980 2 Year Warranty.
Stock Ref. No: ACH315B
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor

PDF DOWNLOADS:

F&W Instructions

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

Metal In-Line centrifugal duct fans are available in six sizes providing a selection of air volumes from 0.08m³/s to 0.5m³/s (290m³/h to 1800m³/h) at free air and capable of pressure development up to 700 Pa.

The fan housing is manufactured from galvanised steel. Models are supplied complete with an easy to fit mounting bracket for horizontal or vertical mounting.

Motor / Impellers

Airtrak Centrifugal models are fitted with an external rotor motor and backward curved impeller assembly for long life and reliability. Sizes 100 & 125 have plastic a plastic impeller. All other sizes have metal impellers. Protected to IP44 according to BS EN 60529 and IEC 34-5. Ball bearings are greased for life and designed to run at any angle. Insulation is Class 'B' (from -30°C to +40°C). Manufacture is controlled to BS EN ISO 9001.

Electrical

Motors are single phase 220-240V/50 Hz. Capacitor start and run. An IP54 terminal box is supplied with a 650mm flying lead, 20mm entry and the capacitor is conveniently located in the terminal box. All motors are fitted with Standard Thermal Overload Protection (S.T.O.P).

Technical

DIMENSIONS:

Model Øa Øb c d Weight Kg
ACH100-12A 98 243 23 195 3.0
ACH125-12A 122 242 27 197 3.0
ACH150-12A 147 333 23 216 5.0
ACH200-12A 198 333 24 223 5.0
ACH250-12A 248 333 27 206 6.0
ACH315-12A 312 400 25 232 8.0

Models

Image of AirTrak In-Line Centrifugal Duct fan - 100mm Diameter
AirTrak In-Line Centrifugal Duct fan - 100mm Diameter

Specification: 100mm diameter Motor Insulation Class B, protected to IP44 Operating Temperatures from -15°C up to +40°C HOT SPOT Protection Suitable for speed control using electronic or Voltage controller Quality Assurance to BS EN ISO 9001:1994 Performance tested to BS848 Part 1 1980 2 Year Warranty.

Stock Ref. No: ACH100B
This Model no longer available
Image of New AirTrak In-Line Centrifugal Duct fan - 125mm Diameter
New AirTrak In-Line Centrifugal Duct fan - 125mm Diameter
Specification: 125mm diameter Motor Insulation Class B, protected to IP44 Operating Temperatures from -15°C up to +40°C HOT SPOT Protection Suitable for speed control using electronic or Voltage controller Quality Assurance to BS EN ISO 9001:1994 Performance tested to BS848 Part 1 1980 2 Year Warranty.
Stock Ref. No: ACH125B
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of New AirTrak In-Line Centrifugal Duct fan - 150mm Diameter
New AirTrak In-Line Centrifugal Duct fan - 150mm Diameter
Specification: 150mm diameter Motor Insulation Class B, protected to IP44 Operating Temperatures from -15°C up to +40°C HOT SPOT Protection Suitable for speed control using electronic or Voltage controller Quality Assurance to BS EN ISO 9001:1994 Performance tested to BS848 Part 1 1980 2 Year Warranty.
Stock Ref. No: ACH150B
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of New AirTrak In-Line Centrifugal Duct fan - 200mm Diameter
New AirTrak In-Line Centrifugal Duct fan - 200mm Diameter
Specification: 200mm diameter Motor Insulation Class B, protected to IP44 Operating Temperatures from -15°C up to +40°C HOT SPOT Protection Suitable for speed control using electronic or Voltage controller Quality Assurance to BS EN ISO 9001:1994 Performance tested to BS848 Part 1 1980 2 Year Warranty.
Stock Ref. No: ACH200B
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of New AirTrak In-Line Centrifugal Duct fan - 250mm Diameter
New AirTrak In-Line Centrifugal Duct fan - 250mm Diameter
Specification: 250mm diameter Motor Insulation Class B, protected to IP44 Operating Temperatures from -15°C up to +40°C HOT SPOT Protection Suitable for speed control using electronic or Voltage controller Quality Assurance to BS EN ISO 9001:1994 Performance tested to BS848 Part 1 1980 2 Year Warranty.
Stock Ref. No: ACH250B
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of New AirTrak In-Line Centrifugal Duct fan - 315mm Diameter
New AirTrak In-Line Centrifugal Duct fan - 315mm Diameter
Specification: 315mm diameter Motor Insulation Class B, protected to IP44 Operating Temperatures from -15°C up to +40°C HOT SPOT Protection Suitable for speed control using electronic or Voltage controller Quality Assurance to BS EN ISO 9001:1994 Performance tested to BS848 Part 1 1980 2 Year Warranty.
Stock Ref. No: ACH315B
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor

Downloads

PDF DOWNLOADS:

F&W Instructions

Related Products

Useful links