HR300RW6

This product range is now obsolete and no longer available from Vent-Axia. The information here is provided for reference only.

Balanced supply and extraction
70% Heat Recovery
Spigots to suit 150mm Ducting
Lightweight Polymeric construction

The HR300RW6 is a semi-remote unit designed for mounting in an external wall.Two 150mm diameter spigots are provided for ducting connection to internal supply and extract grilles. The unit provides balanced supply and extraction with up to 70% heat recovery. Controlling internal relative humidity, the HR300RW6 unit controls condensation and eliminates mould.

Fresh pre-warmed air from outside is continually provided to the room with simultaneous extraction of stale air and smells. Heat is transferred via a unique plastic heat exchanger from outgoing air to the fresh air supply with zero cross contamination, maintaining internal temperatures and providing a fresh environment.

Available in three speeds: 75, 210 and 280m³/h. It is ideal for offices, changing rooms and examination rooms, etc.

Installation

The HR300RW6 is designed for installation in an external wall providing (150mm) diameter spigots on the inner plate for ducted extraction and fresh air supply. The unit requires a 280mm wide and 380mm high hole and is mounted through the wall in a vertical position.The HR300RW6 requires a minimum overhang of 70mm on the outside and 50mm inside. Units should be level to assist in-built condensate drainage.

PERFORMANCE:

Extract Performance
m³/h
Supply Performance
m³/h

Trickle
Medium
Boost
Trickle
Medium
Boost

75
210
280
70
190
270

DIMENSIONS:

Weight: 11kg

Power Consumption
Maximum 108.0W
Image of HR300RW6
HR300RW6

The HR300RW6 is a semi-remote unit designed for mounting in an external wall.Two 150mm diameter spigots are provided for ducting connection to internal supply and extract grilles. The unit provides balanced supply and extraction with up to 70% heat recovery. Controlling internal relative humidity, the HR300RW6 unit controls condensation and eliminates mould. Fresh pre-warmed air from outside is continually provided to the room with simultaneous extraction of stale air and smells. Heat is transferred via a unique plastic heat exchanger from outgoing air to the fresh air supply with zero cross contamination, maintaining internal temperatures and providing a fresh environment. Available in three speeds: 75, 210 and 280m³/h. It is ideal for offices, changing rooms and examination rooms, etc.

Stock Ref. No: 370403
Price £868.08 (excl VAT)
This Model no longer available

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

The HR300RW6 is a semi-remote unit designed for mounting in an external wall.Two 150mm diameter spigots are provided for ducting connection to internal supply and extract grilles. The unit provides balanced supply and extraction with up to 70% heat recovery. Controlling internal relative humidity, the HR300RW6 unit controls condensation and eliminates mould.

Fresh pre-warmed air from outside is continually provided to the room with simultaneous extraction of stale air and smells. Heat is transferred via a unique plastic heat exchanger from outgoing air to the fresh air supply with zero cross contamination, maintaining internal temperatures and providing a fresh environment.

Available in three speeds: 75, 210 and 280m³/h. It is ideal for offices, changing rooms and examination rooms, etc.

Installation

The HR300RW6 is designed for installation in an external wall providing (150mm) diameter spigots on the inner plate for ducted extraction and fresh air supply. The unit requires a 280mm wide and 380mm high hole and is mounted through the wall in a vertical position.The HR300RW6 requires a minimum overhang of 70mm on the outside and 50mm inside. Units should be level to assist in-built condensate drainage.

Technical

PERFORMANCE:

Extract Performance
m³/h
Supply Performance
m³/h

Trickle
Medium
Boost
Trickle
Medium
Boost

75
210
280
70
190
270

DIMENSIONS:

Weight: 11kg

Power Consumption
Maximum 108.0W

Models

Image of HR300RW6
HR300RW6

The HR300RW6 is a semi-remote unit designed for mounting in an external wall.Two 150mm diameter spigots are provided for ducting connection to internal supply and extract grilles. The unit provides balanced supply and extraction with up to 70% heat recovery. Controlling internal relative humidity, the HR300RW6 unit controls condensation and eliminates mould. Fresh pre-warmed air from outside is continually provided to the room with simultaneous extraction of stale air and smells. Heat is transferred via a unique plastic heat exchanger from outgoing air to the fresh air supply with zero cross contamination, maintaining internal temperatures and providing a fresh environment. Available in three speeds: 75, 210 and 280m³/h. It is ideal for offices, changing rooms and examination rooms, etc.

Stock Ref. No: 370403
Price £868.08 (excl VAT)
This Model no longer available

Downloads

Related Products

Useful links