Fume Handling Units - CFF

This product range is now obsolete and no longer available from Vent-Axia. The information here is provided for reference only.

FAQs Answered:

Manufactured from
UV stabilzed polypropylene
Motor mounted outside the airstream
Internal mounting (IP55)
Suitable for extracting aggressive corrosive air
Quality Assurance to BS EN ISO 9001
Performance tested to BS 848 Part 1

Range of anti-corrosive polypropylene direct-drive single inlet centrifugal fans.

Application
The CFF range of fans are suitable for many special applications where the extraction of a corrosive atmosphere is required. Such applications include the extraction of the following:

- Industrial chemical fumes
- Petrochemical fumes
- Laboratories

Construction
Casing
The casing and inlet connection flange are moulded from tough polypropylene plastic. All models are provided with a robust sheet metal mounting frame to support the motor and facilitate installation.

Impellers
All models incorporate radial centrifugal impellers manufactured from tough polypropylene.

Motors
All models incorporate asynchronous induction motors with squirrel cage rotor in die cast aluminium. Manufactured in accordance with IEC 34-1 standard.

The following standard specifications apply:
- Single Phase 230V 50Hz
- Three phase 400V 50Hz.
- IP55 protection, with Class F insulation.

Mounting Arrangements
All models are also provided with a robust sheet metal mounting frame to support the motor and facilitate installation. Easily Rotatable discharge outlet standard on 160-250 models.

Special Version
Depending upon requirements the CFF range of fans can be supplied with the following:
Casings manufactured from PVC, for the extraction of air/gas containing chromium.

Note:
Three Phase units are suitable for frequency inverter speed control
Single Phase units are not suitable for speed control
Motor must have overload protection and should also have single phasing prevention.

DIMENSIONS:

Part No	Unit Weight (Kg)	Motor	Motor kW	S.C. Amps	F.L.C. Amps
Three Phase Units
CFF16034	10.8	3 phase	0.25	2.10	0.6
CFF20034	17.6	3 phase	0.37	3.68	1.05
CFF25034	35.2	3 phase	1.5	17.5	3.5
CFF31534	59.8	3 phase	2.2	24.5	4.9
Single Phase Units
CFF16014	10.8	1 phase	0.25	6.15	2.5
CFF20014	17.6	1 phase	0.37	7.92	3.4
CFF25014	35.2	1 phase	1.5	21.04	8.0

---
Part No	D.O.L. Starter Part No	Overload Part No	Flexible Connector Part No (Pair)	Worm Drive Clips Part No	Set of Av's Part No
Three Phase Units
CFF16034	10311415A	10312015A	431681	561707	AVM220
CFF20034	10311415A	10312015A	431683	561710	AVM220
CFF25034	10311415A	10312050A	431685	561710	AVM220
CFF31534	10311415A	10312075A	431688	561715	AVM220
Single Phase Units
CFF16014	10311240A	10312033A	431681	561707	AVM220
CFF20014	10311240A	10312050A	431683	561710	AVM220
CFF25014	10311240A	10312100A	431685	561710	AVM220

PDF DOWNLOADS:

Catalogue

F&W Instructions

Raadpleeg de tab Downloads voor technische informatie

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model

Based on the inputted figures, estimated running costs would be:

Overview