Bifurcated Axial Fume Handling fans - (Polypropylene)

This product range is now obsolete and no longer available from Vent-Axia. The information here is provided for reference only.

At a Glance:

Designed to complement the centrifugal fume handling units on offer from Vent-Axia
Manufactured from UV stabilised polypropylene
Motor mounted outside the airstream
Suitable for extracting aggressive corrosive air
Suitable for either internal or external mounting

FAQ's Answered:

Quality Assurance to BS EN ISO 9001
Performance tested to BS 848 Part 1
 

A range of axial flow bifurcated fans designed to complement the centrifugal fume handling units we offer, and withstand the rigours of fume extraction systems. Features high performance axial flow fans and powerful high quality motors built to withstand hostile environments

Casings

The fan casing is constructed in heavy gauge polypropylene UV stabilised with the bore specially engineered to provide a tight clearance fit. It is complete with drilled flanges at each end to which, either ducting can be directly connected (adequately supported) or, matching flanges with flexible connectors.

Motor & Impellers

A high performance aerofoil section axial-flow impeller in durable polypropylene statically and dynamically balanced. Driven through an extension shaft by a totally enclosed, fan cooled single speed motor to BS 5000/99 out of the airstream and is wound to suit standard UK voltages all complete with terminal box (and capacitor on single phase types).

Electrical

The BIF range is available for either single phase 220-240V 50 Hz capacitor start and run or three phase 380-415V 50Hz.

Terminal Box
An IP54 terminal box is supplied with all models with 20mm and PGII entry offering protection against dust and water jets from any angle.

DIMENSIONS:

Diagram:

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

A range of axial flow bifurcated fans designed to complement the centrifugal fume handling units we offer, and withstand the rigours of fume extraction systems. Features high performance axial flow fans and powerful high quality motors built to withstand hostile environments

Casings

The fan casing is constructed in heavy gauge polypropylene UV stabilised with the bore specially engineered to provide a tight clearance fit. It is complete with drilled flanges at each end to which, either ducting can be directly connected (adequately supported) or, matching flanges with flexible connectors.

Motor & Impellers

A high performance aerofoil section axial-flow impeller in durable polypropylene statically and dynamically balanced. Driven through an extension shaft by a totally enclosed, fan cooled single speed motor to BS 5000/99 out of the airstream and is wound to suit standard UK voltages all complete with terminal box (and capacitor on single phase types).

Electrical

The BIF range is available for either single phase 220-240V 50 Hz capacitor start and run or three phase 380-415V 50Hz.

Terminal Box
An IP54 terminal box is supplied with all models with 20mm and PGII entry offering protection against dust and water jets from any angle.

Technical

DIMENSIONS:

Diagram:

Downloads

Related Products

Useful links