Lo-Carbon T-Series Wall Models

• Long life Lo-Carbon motor lasts twice as long as conventional motors
• Reduces your carbon footprint
• Extract/intake model in 2 sizes: 9” and 12”
• Up to 70% energy saving
• Easy fit connector Top Socket, standard on all models

Select a product

UK’s No. 1 Commercial Fan

The Lo-Carbon T-Series Fan range utilises a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.

Wall Fan

Lo-Carbon T-Series wall models are designed to fit directly into double brick, solid and cavity walls. The two part telescopic liner accommodates wall thicknesses from 240 to 315mm. For thicker walls additional liner sections are available. Lo-Carbon T-Series wall models are provided with internal and external wall frames which fit flush with both faces of the wall. Conduit entry is provided for concealed wiring.

Instantaneous Shutter

Lo-Carbon T-Series models are supplied complete with an integral instantaneous automatic louvre shutter which will operate on both intake and extract and at any angle of mounting. When the ventilating unit is used with a Lo-Carbon T-Series controller, the shutter can be set open with the fan motor switched Off to provide natural ventilation without the security risk of an open window.

Electrical

Motor purpose-designed. Suitable for running at any angle. Quiet running. Suitable for operation in ambient temperatures from -40°C to +50°C. Fitted with self resetting Standard Thermal Overload Protection (S.T.O.P.). Supply voltage 220-240V/1/50Hz.

Top Socket

A connector Top Socket is standard on all T-Series fans. Allowing fast and trouble-free mains connection.

 

Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.

PERFORMANCE:

Unit Size   LoWatt TX9WL Wireless LoWatt TX9WL
Stock Ref. No.   45 61 70 45 61 66
Amps @ 240V   0.31 0.31
Extract Performance m³/h Low 326 326
Extract Performance m³/h Med 562 562
Extract Performance m³/h High 732 732
Watts (high)   27 27
dB(A) (med) @ 3m   39 39
---
Unit Size   LoWatt TX12WL Wireless LoWatt TX12WL
Stock Ref. No.   45 61 78 45 61 74
Amps @ 240V   0.70 0.70
Extract Performance m³/h Low 660 660
Extract Performance m³/h Med 1355 1355
Extract Performance m³/h High 1650 1650
Watts (high)   68 68
dB(A) (med) @ 3m   48 48
---
Recommended Controller:
Wired Controller Stock Ref. No. 45 58 73
 
 

DIMENSIONS:

Size A B C D E F Weight kg
230mm 391 388 365 375 143 25 7.77
300mm 470 467 442 450 182 25 10.864
 
 
Image of Lo-Carbon TX9WL Wireless
Lo-Carbon TX9WL Wireless

Behind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.

Stock Ref. No: 456170
This Model no longer available
Image of Lo-Carbon TX9WL
Lo-Carbon TX9WL
Behind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.
Stock Ref. No: 456166
Price £1099.38 (excl VAT)
Image of Lo-Carbon TX12WL Wireless
Lo-Carbon TX12WL Wireless

Behind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.

Stock Ref. No: 456178
This Model no longer available
Image of Lo-Carbon TX12WL
Lo-Carbon TX12WL
Behind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.
Stock Ref. No: 456174
Price £1455.00 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of Wired Controller for Lo-Carbon T-Series Range
Wired Controller for Lo-Carbon T-Series Range

Lo-Carbon T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors. Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.

Stock Ref. No: 455873
Price £190.89 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of Wireless Controller for Lo-Carbon T-Series Range
Wireless Controller for Lo-Carbon T-Series Range

Every LoWatt T-Series Wire-less FM Controller uses unique digital signals to ensure trouble free operation. The controller will transmit through walls and floors allowing complete flexibility of design to control fans up to 30m away. Wire-less FM Controllers can dramatically reduce installation time and costs. The Immediate benefit being the elimination of unsightly wiring. Wire-less FM Controllers can be easily installed in an variety of applications including assembly rooms, banks, hospitals, laboratories, restaurants, schools, shops and public houses.

Stock Ref. No: 455874
This Model no longer available
Image of Ambient Response Humidity Sensor
Ambient Response Humidity Sensor

240VAC 50Hz. 

European Patent No: 2298057

Stock Ref. No: 563550
Price £354.44 (excl VAT)
Image of Ecotronic Humidity Sensor
Ecotronic Humidity Sensor

An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90% relative humidity. Can be wired into controller ‘Auto’ mode connections. Incorporates changeover switch to select low/high speed.

  • Setting range 65% - 90%RH.
  • Maximum switching load 1 Amp inductive.
  • Pullcord override indicated by lamp.
  • Ambient operating temperature 0°C to +40°C.
  • Dimensions: 87 x 87 x 33mm. (H x W x D).
  • Supply voltage 220-240V/1/50Hz.
Stock Ref. No: 563532
Price £196.88 (excl VAT)
Image of Air Quality Sensor
Air Quality Sensor
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches the fan On when the air quality declines below an adjustable preset level. This is registered by the ceramic sensing head which is self-cleansing, a process which occurs every time the unit is triggered. When the atmosphere has returned to normal, the fan will continue to run for a pre-set period (adjustable between 1-25 minutes) and then switch Off. The air quality sensor should not be used for the detection of combustible gases and is not designed for use as a smoke detector in an alarm system. The AQS is compatible with T-Series, Multi-Unit, Rangemaster, Ecotronic and TimeSwitch controllers. Features & Benefits: Ambient operating temp range 0°C to +40°C. DEMKO Approved. Dimensions: 87 x 157 x 47mm (H x W x D). Supply voltage 220-240V/1/50Hz Surface mounted. Downloads Catalogue Pages
Stock Ref. No: 563506
Price £409.73 (excl VAT)
Image of Vent-Axia Visionex PIR
Vent-Axia Visionex PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Visionex PIR can be wired for either On/Off or Trickle/ Boost operation.

  • Fits any UK single gang mounting box.
  • Adjustable timer overrun (5-25 minutes).
  • Range of detection up to 10 metres.
  • Designed to meet IP43.
  • Ambient operating temperature range 0°C to +50°C.
  • Maximum load: 2.5 amps/600W inductive. Not suitable for use with lighting.
  • Internal use only.
  • No switched live required for internal rooms and WCs.
  • Double insulated.
  • Volt-free contacts.
  • Supply voltage 220-240V/1/50Hz.
Stock Ref. No: 459623
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

UK’s No. 1 Commercial Fan

The Lo-Carbon T-Series Fan range utilises a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.

Wall Fan

Lo-Carbon T-Series wall models are designed to fit directly into double brick, solid and cavity walls. The two part telescopic liner accommodates wall thicknesses from 240 to 315mm. For thicker walls additional liner sections are available. Lo-Carbon T-Series wall models are provided with internal and external wall frames which fit flush with both faces of the wall. Conduit entry is provided for concealed wiring.

Instantaneous Shutter

Lo-Carbon T-Series models are supplied complete with an integral instantaneous automatic louvre shutter which will operate on both intake and extract and at any angle of mounting. When the ventilating unit is used with a Lo-Carbon T-Series controller, the shutter can be set open with the fan motor switched Off to provide natural ventilation without the security risk of an open window.

Electrical

Motor purpose-designed. Suitable for running at any angle. Quiet running. Suitable for operation in ambient temperatures from -40°C to +50°C. Fitted with self resetting Standard Thermal Overload Protection (S.T.O.P.). Supply voltage 220-240V/1/50Hz.

Top Socket

A connector Top Socket is standard on all T-Series fans. Allowing fast and trouble-free mains connection.

 

Technical

Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.

PERFORMANCE:

Unit Size   LoWatt TX9WL Wireless LoWatt TX9WL
Stock Ref. No.   45 61 70 45 61 66
Amps @ 240V   0.31 0.31
Extract Performance m³/h Low 326 326
Extract Performance m³/h Med 562 562
Extract Performance m³/h High 732 732
Watts (high)   27 27
dB(A) (med) @ 3m   39 39
---
Unit Size   LoWatt TX12WL Wireless LoWatt TX12WL
Stock Ref. No.   45 61 78 45 61 74
Amps @ 240V   0.70 0.70
Extract Performance m³/h Low 660 660
Extract Performance m³/h Med 1355 1355
Extract Performance m³/h High 1650 1650
Watts (high)   68 68
dB(A) (med) @ 3m   48 48
---
Recommended Controller:
Wired Controller Stock Ref. No. 45 58 73
 
 

DIMENSIONS:

Size A B C D E F Weight kg
230mm 391 388 365 375 143 25 7.77
300mm 470 467 442 450 182 25 10.864
 
 

Models

Image of Lo-Carbon TX9WL Wireless
Lo-Carbon TX9WL Wireless

Behind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.

Stock Ref. No: 456170
This Model no longer available
Image of Lo-Carbon TX9WL
Lo-Carbon TX9WL
Behind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.
Stock Ref. No: 456166
Price £1099.38 (excl VAT)
Image of Lo-Carbon TX12WL Wireless
Lo-Carbon TX12WL Wireless

Behind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.

Stock Ref. No: 456178
This Model no longer available
Image of Lo-Carbon TX12WL
Lo-Carbon TX12WL
Behind the grille of the Lo-Carbon T-Series Wall model is a high performance extract/intake ventilating unit designed to fit through most wall thicknesses using the telescopic liner supplied. For walls of exceptional thickness additional liners can be used. Conduit entry is provided for concealed wiring.
Stock Ref. No: 456174
Price £1455.00 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor

Accessories

Image of Wired Controller for Lo-Carbon T-Series Range
Wired Controller for Lo-Carbon T-Series Range

Lo-Carbon T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors. Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.

Stock Ref. No: 455873
Price £190.89 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of Wireless Controller for Lo-Carbon T-Series Range
Wireless Controller for Lo-Carbon T-Series Range

Every LoWatt T-Series Wire-less FM Controller uses unique digital signals to ensure trouble free operation. The controller will transmit through walls and floors allowing complete flexibility of design to control fans up to 30m away. Wire-less FM Controllers can dramatically reduce installation time and costs. The Immediate benefit being the elimination of unsightly wiring. Wire-less FM Controllers can be easily installed in an variety of applications including assembly rooms, banks, hospitals, laboratories, restaurants, schools, shops and public houses.

Stock Ref. No: 455874
This Model no longer available
Image of Ambient Response Humidity Sensor
Ambient Response Humidity Sensor

240VAC 50Hz. 

European Patent No: 2298057

Stock Ref. No: 563550
Price £354.44 (excl VAT)
Image of Ecotronic Humidity Sensor
Ecotronic Humidity Sensor

An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90% relative humidity. Can be wired into controller ‘Auto’ mode connections. Incorporates changeover switch to select low/high speed.

  • Setting range 65% - 90%RH.
  • Maximum switching load 1 Amp inductive.
  • Pullcord override indicated by lamp.
  • Ambient operating temperature 0°C to +40°C.
  • Dimensions: 87 x 87 x 33mm. (H x W x D).
  • Supply voltage 220-240V/1/50Hz.
Stock Ref. No: 563532
Price £196.88 (excl VAT)
Image of Air Quality Sensor
Air Quality Sensor
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches the fan On when the air quality declines below an adjustable preset level. This is registered by the ceramic sensing head which is self-cleansing, a process which occurs every time the unit is triggered. When the atmosphere has returned to normal, the fan will continue to run for a pre-set period (adjustable between 1-25 minutes) and then switch Off. The air quality sensor should not be used for the detection of combustible gases and is not designed for use as a smoke detector in an alarm system. The AQS is compatible with T-Series, Multi-Unit, Rangemaster, Ecotronic and TimeSwitch controllers. Features & Benefits: Ambient operating temp range 0°C to +40°C. DEMKO Approved. Dimensions: 87 x 157 x 47mm (H x W x D). Supply voltage 220-240V/1/50Hz Surface mounted. Downloads Catalogue Pages
Stock Ref. No: 563506
Price £409.73 (excl VAT)
Image of Vent-Axia Visionex PIR
Vent-Axia Visionex PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Visionex PIR can be wired for either On/Off or Trickle/ Boost operation.

  • Fits any UK single gang mounting box.
  • Adjustable timer overrun (5-25 minutes).
  • Range of detection up to 10 metres.
  • Designed to meet IP43.
  • Ambient operating temperature range 0°C to +50°C.
  • Maximum load: 2.5 amps/600W inductive. Not suitable for use with lighting.
  • Internal use only.
  • No switched live required for internal rooms and WCs.
  • Double insulated.
  • Volt-free contacts.
  • Supply voltage 220-240V/1/50Hz.
Stock Ref. No: 459623
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor

Downloads

Related Products

Useful links