HR500D
Self-contained unit with integral fans
Up to 70% heat recovery
External wall mounting
Select a product
The HR500D is a self-contained unit with integral extract and supply fans to provide balanced ventilation and heat recovery via supply diffusers and extraction grilles. The unit is fully speed controllable.
The compact heat recovery cube interleaves outgoing warm air with incoming fresh air and allows the heat from one to warm the other without the two streams mixing.
Energy is saved on room heating with no power being used by the cube itself.
Performance of HR500D: Supply and extract up to 174 l/s FID capacity on heat recovery mode. Ideal for offices, computer rooms, pubs and clubs, etc.
DIMENSIONS:
Fitting Hole Size: 610mm × 381mm
Weight: 19kg
Power Consumption | |
Supply fan | 60.0W |
Extract fan | 150.0W |
With knockouts for recessed wiring or surface wiring. An optional flush fitting box is available. Requires 5-core cable. One controller will operate a maximum of 2 HR500 or HR500X units. On/Off/Sensor mode. Choice of heat exchange or high/low speed extract fan mode. Infinitely variable speed control from low to high. Adjustable minimum speed. With integral thermal cut-out and circuit fuse protection.
Raadpleeg de tab Downloads voor technische informatie
ESTIMATED RUNNING COSTS
Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model
Based on the inputted figures, estimated running costs would be:
Overview
The HR500D is a self-contained unit with integral extract and supply fans to provide balanced ventilation and heat recovery via supply diffusers and extraction grilles. The unit is fully speed controllable.
The compact heat recovery cube interleaves outgoing warm air with incoming fresh air and allows the heat from one to warm the other without the two streams mixing.
Energy is saved on room heating with no power being used by the cube itself.
Performance of HR500D: Supply and extract up to 174 l/s FID capacity on heat recovery mode. Ideal for offices, computer rooms, pubs and clubs, etc.
Technical
DIMENSIONS:
Fitting Hole Size: 610mm × 381mm
Weight: 19kg
Power Consumption | |
Supply fan | 60.0W |
Extract fan | 150.0W |
Models
Accessories
With knockouts for recessed wiring or surface wiring. An optional flush fitting box is available. Requires 5-core cable. One controller will operate a maximum of 2 HR500 or HR500X units. On/Off/Sensor mode. Choice of heat exchange or high/low speed extract fan mode. Infinitely variable speed control from low to high. Adjustable minimum speed. With integral thermal cut-out and circuit fuse protection.