Traditional T-Series - In-Line Models

• Extract/intake model in 3 sizes: 6”, 9” and 12”
• Patented instantaneous electronic shutter system ensures quiet, trouble free operation
• For the best from your fan use the Ecotronic controller
• T-Series controllers and sensor save energy by only switching on the units when you want them to, either manually or automatically
• Easy fit connector Top Socket, standard on all models

Select a product

UK’s No. 1 Commercial Fan

No other range of high performance in-line duct fans offers a combination of 3 impeller diameters, reversibility, low sound level, speed control and built-in electric shutter. T-Series features a unique speed control pack which enables high, medium or low speed to be preset to suit room size or required duty.  Designed for use with rigid or flexible ducting, T-Series In-Line models can be plate mounted or fixed through partitions and in ceiling voids.

T-Series controllers may be used with this model to obtain a choice of speeds, extract/intake airflow direction and automatic sensor operation. The Vent-Axia Ecotronic controller gives even greater running economy with its minimum speed setting and ‘E’ mode.

Top Socket

A connector Top Socket is standard on all T-Series fans. Allowing fast and trouble-free mains connection.

Shutter

The shutter is electronically controlled by an actuator with a damped action giving quiet operation during instant opening and closing. The interlocking edges of the shutter blades provide maximum back draught protection.

When the fan is used with a T-Series or Ecotronic controller, the shutter can be set  open with the fan motor switched off to provide natural ventilation without the security risk of an open window.

Ducts

Where ducts pass through an unheated roof void, the duct should be insulated. Horizontal ducts should fall away from the fan unit. In circumstances where an excessive amount of moisture is present, a condensation trap should be installed in the exhaust duct. The fan unit should be accessible for regular maintenance.

Electrical

Suitable for operation in ambient temperatures from -40°C to +50°C. Fitted with Standard Thermal Overload Protection (S.T.O.P.).

Supply voltage 220-240V/1/50 Hz

Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.

DIMENSIONS:

Size 6 (150mm) 9 (230mm) 12 (300mm)
A 75 71 200
B 175 183 337
C 45 41 45
DØ 175 300 400
E 220 302 378
F 226 304 381
Fixing Hole Diameter 184 260 337
kg 4.5 8 11.5
 
 
Image of TX6IL
TX6IL
T-Series In-Line models are reversible, offer low sound levels, speed control and build in electronic shutter
Stock Ref. No: W161710
Price £546.07 (excl VAT)
Image of TX9IL
TX9IL
T-Series In-Line models are reversible, offer low sound levels, speed control and build in electronic shutter
Stock Ref. No: W163710
Price £996.32 (excl VAT)
Image of TX12IL
TX12IL
T-Series In-Line models are reversible, offer low sound levels, speed control and build in electronic shutter
Stock Ref. No: W164710
Price £1325.69 (excl VAT)
Image of T-Series Controller
T-Series Controller
Three speeds. Choice of extract/intake Shutter open, fan Off setting Sensor mode. Enables external electro mechanical switches, eg: Ecotronic, HumidiSwitch, ThermoSwitch and TimeSwitch to control the fan.
Stock Ref. No: W361119
Price £190.02 (excl VAT)
Image of Ecotronic Controller
Ecotronic Controller

For groups of units of any one size up to a total of 400 watts. Do not mix T-Series with Standard Range ventilating units on one controller.

Stock Ref. No: W362320
Price £260.45 (excl VAT)
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon

Designed specifically for the Lo-Carbon product range. This self programming electronic On/Off wall mounted humidity sensor reacts to any rapid increase in humidity and temperature by switching a VentAxia fan ‘On’ for rapid removal of moisture laden air in domestic bathrooms and kitchens. Night time relative humidity increment setback feature suppresses nuisance tripping when the humidity level gradually rises as the temperature falls.

  • Pullcord override and neon indicator.
  • Changeover relay switch.
  • Operating range: 30%-90%RH.
  • Ambient operating temperature +5°C to +40°C.
  • Dimensions: 87 x 87 x 33mm (H x W x D).
  • Will fit single gang box for surface mounting.
Stock Ref. No: 563552
Price £340.97 (excl VAT)
Image of Air Quality Sensor
Air Quality Sensor
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches the fan On when the air quality declines below an adjustable preset level. This is registered by the ceramic sensing head which is self-cleansing, a process which occurs every time the unit is triggered. When the atmosphere has returned to normal, the fan will continue to run for a pre-set period (adjustable between 1-25 minutes) and then switch Off. The air quality sensor should not be used for the detection of combustible gases and is not designed for use as a smoke detector in an alarm system. The AQS is compatible with T-Series, Multi-Unit, Rangemaster, Ecotronic and TimeSwitch controllers. Features & Benefits: Ambient operating temp range 0°C to +40°C. DEMKO Approved. Dimensions: 87 x 157 x 47mm (H x W x D). Supply voltage 220-240V/1/50Hz Surface mounted. Downloads Catalogue Pages
Stock Ref. No: 563506
Price £394.16 (excl VAT)

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

UK’s No. 1 Commercial Fan

No other range of high performance in-line duct fans offers a combination of 3 impeller diameters, reversibility, low sound level, speed control and built-in electric shutter. T-Series features a unique speed control pack which enables high, medium or low speed to be preset to suit room size or required duty.  Designed for use with rigid or flexible ducting, T-Series In-Line models can be plate mounted or fixed through partitions and in ceiling voids.

T-Series controllers may be used with this model to obtain a choice of speeds, extract/intake airflow direction and automatic sensor operation. The Vent-Axia Ecotronic controller gives even greater running economy with its minimum speed setting and ‘E’ mode.

Top Socket

A connector Top Socket is standard on all T-Series fans. Allowing fast and trouble-free mains connection.

Shutter

The shutter is electronically controlled by an actuator with a damped action giving quiet operation during instant opening and closing. The interlocking edges of the shutter blades provide maximum back draught protection.

When the fan is used with a T-Series or Ecotronic controller, the shutter can be set  open with the fan motor switched off to provide natural ventilation without the security risk of an open window.

Ducts

Where ducts pass through an unheated roof void, the duct should be insulated. Horizontal ducts should fall away from the fan unit. In circumstances where an excessive amount of moisture is present, a condensation trap should be installed in the exhaust duct. The fan unit should be accessible for regular maintenance.

Electrical

Suitable for operation in ambient temperatures from -40°C to +50°C. Fitted with Standard Thermal Overload Protection (S.T.O.P.).

Supply voltage 220-240V/1/50 Hz

Technical

Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.

DIMENSIONS:

Size 6 (150mm) 9 (230mm) 12 (300mm)
A 75 71 200
B 175 183 337
C 45 41 45
DØ 175 300 400
E 220 302 378
F 226 304 381
Fixing Hole Diameter 184 260 337
kg 4.5 8 11.5
 
 

Models

Image of TX6IL
TX6IL
T-Series In-Line models are reversible, offer low sound levels, speed control and build in electronic shutter
Stock Ref. No: W161710
Price £546.07 (excl VAT)
Image of TX9IL
TX9IL
T-Series In-Line models are reversible, offer low sound levels, speed control and build in electronic shutter
Stock Ref. No: W163710
Price £996.32 (excl VAT)
Image of TX12IL
TX12IL
T-Series In-Line models are reversible, offer low sound levels, speed control and build in electronic shutter
Stock Ref. No: W164710
Price £1325.69 (excl VAT)

Accessories

Image of T-Series Controller
T-Series Controller
Three speeds. Choice of extract/intake Shutter open, fan Off setting Sensor mode. Enables external electro mechanical switches, eg: Ecotronic, HumidiSwitch, ThermoSwitch and TimeSwitch to control the fan.
Stock Ref. No: W361119
Price £190.02 (excl VAT)
Image of Ecotronic Controller
Ecotronic Controller

For groups of units of any one size up to a total of 400 watts. Do not mix T-Series with Standard Range ventilating units on one controller.

Stock Ref. No: W362320
Price £260.45 (excl VAT)
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon

Designed specifically for the Lo-Carbon product range. This self programming electronic On/Off wall mounted humidity sensor reacts to any rapid increase in humidity and temperature by switching a VentAxia fan ‘On’ for rapid removal of moisture laden air in domestic bathrooms and kitchens. Night time relative humidity increment setback feature suppresses nuisance tripping when the humidity level gradually rises as the temperature falls.

  • Pullcord override and neon indicator.
  • Changeover relay switch.
  • Operating range: 30%-90%RH.
  • Ambient operating temperature +5°C to +40°C.
  • Dimensions: 87 x 87 x 33mm (H x W x D).
  • Will fit single gang box for surface mounting.
Stock Ref. No: 563552
Price £340.97 (excl VAT)
Image of Air Quality Sensor
Air Quality Sensor
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches the fan On when the air quality declines below an adjustable preset level. This is registered by the ceramic sensing head which is self-cleansing, a process which occurs every time the unit is triggered. When the atmosphere has returned to normal, the fan will continue to run for a pre-set period (adjustable between 1-25 minutes) and then switch Off. The air quality sensor should not be used for the detection of combustible gases and is not designed for use as a smoke detector in an alarm system. The AQS is compatible with T-Series, Multi-Unit, Rangemaster, Ecotronic and TimeSwitch controllers. Features & Benefits: Ambient operating temp range 0°C to +40°C. DEMKO Approved. Dimensions: 87 x 157 x 47mm (H x W x D). Supply voltage 220-240V/1/50Hz Surface mounted. Downloads Catalogue Pages
Stock Ref. No: 563506
Price £394.16 (excl VAT)

Downloads

Related Products

Useful links