EuroSeries (ESC) - Short Cased Axial Fans

• External rotor motors
• Die cast aluminium impellers
• Fully speed controllable
• Air Volumes up to 13.89m3/s
• Sizes 250 to 1000 protected to IP54
• Operating Temperatures from -40°C up to +70°C
• Motor Insulation Class F
• HOT SPOT Protection
• Reversible for supply or extract
• Tough epoxy paint finish
• Quality Assurance to BS EN ISO 9001:1994
• Performance tested to BS848 Part 1 1980

The new range of EuroSeries ESC Short Cased axial blade fans, feature a single shot die cast aluminium blade & external rotor motor design.

The EuroSeries ESC range is available in eleven sizes with the extract performances up to 13.89 m³/s, with pressure characteristics of up 300Pa. All units are designed for & fully speed controllable.

Impellers
All sizes shall be supplied with cast aluminium impellers, ensuring performance when working against outdoor conditions and abrasive airflow.

Motors
External rotor motors are specially designed and styled for this range of fan. Ball bearings shall be greased for life. Rotors are dynamically balanced to ISO 1940. Sizes 315-1000mm, motors are protected to IP54, against dust and moisture complying with BS EN 60529:1992. They shall be ribbed aluminium body castings for efficient cooling. Motor insluation is Class 'F' (from -40°C to +70°C).

Electrical
Single phase 220-240V 50Hz. Capacitor start and run. Three phase 380-415V 50Hz. An IP54 terminal box shall be supplied with most models with 20mm and PGII entry. All motors shall be fitted with thermal overload Protection which should be wired into all controller circuits and into starter contactors. Models are available with either 2,4, 6 & 8 pole motors.

Terminal Box
Are to IP54, as standard, protected against dust water jets from any angle allowing outside applications.

Performance
The fan performance, shall be in accordance with tests to BS848 Part 1 1980.

Sound Levels
Fan sound levels, measured in a reverberant chamber in accordance with BS848 Part 2 1985. Published dB(A) figures are free field sound pressure levels at 3m with spherical propogation at a reference level of 2 x 10-5 Pa (20 micro-Pascal). The sound power level spectra figures are dB with reference level of 10-12 Watts (1 pico-watt). To ensure minimum noise levels during speed control, an auto transformer speed control is recommended.

Accessories
A full range of accessories:

  • Electronic Speed Controllers
  • Auto Transformer Speed Controllers
  • D.O.L. Starters & overloads
  • Ancillary Packs (comprising:- 4 AVM's, 2 mounting feet, 2 matching flanges, 2 flexible connectors + clips)
  • Wire Guards
  • Attenuators
  • Mounting Feet
  • Matching Flanges
  • Anti Vibration Mounts
  • Louvre Shutters

DIMENSIONS:

Size a b c d e n Kg
250 254 286 306 110 7 8 5
315 316.5 356 382 135 9.5 8 6.1
355 356 395 421 135 9.5 8 7.1
400 400 438 466 155 9.5 12 8.1
450 451 487 515 160 9.5 12 13.4
500 503 541 567 166 9.5 12 15.7
560 559 605 635 210 11.5 16 20.1
630 634 674 707 220 11.5 16 44
710 711 751 785 260 11.5 16 31
800 797 837 871 280 11.5 24 39
1000 1001 1043 1080 330 11.5 24 73

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

The new range of EuroSeries ESC Short Cased axial blade fans, feature a single shot die cast aluminium blade & external rotor motor design.

The EuroSeries ESC range is available in eleven sizes with the extract performances up to 13.89 m³/s, with pressure characteristics of up 300Pa. All units are designed for & fully speed controllable.

Impellers
All sizes shall be supplied with cast aluminium impellers, ensuring performance when working against outdoor conditions and abrasive airflow.

Motors
External rotor motors are specially designed and styled for this range of fan. Ball bearings shall be greased for life. Rotors are dynamically balanced to ISO 1940. Sizes 315-1000mm, motors are protected to IP54, against dust and moisture complying with BS EN 60529:1992. They shall be ribbed aluminium body castings for efficient cooling. Motor insluation is Class 'F' (from -40°C to +70°C).

Electrical
Single phase 220-240V 50Hz. Capacitor start and run. Three phase 380-415V 50Hz. An IP54 terminal box shall be supplied with most models with 20mm and PGII entry. All motors shall be fitted with thermal overload Protection which should be wired into all controller circuits and into starter contactors. Models are available with either 2,4, 6 & 8 pole motors.

Terminal Box
Are to IP54, as standard, protected against dust water jets from any angle allowing outside applications.

Performance
The fan performance, shall be in accordance with tests to BS848 Part 1 1980.

Sound Levels
Fan sound levels, measured in a reverberant chamber in accordance with BS848 Part 2 1985. Published dB(A) figures are free field sound pressure levels at 3m with spherical propogation at a reference level of 2 x 10-5 Pa (20 micro-Pascal). The sound power level spectra figures are dB with reference level of 10-12 Watts (1 pico-watt). To ensure minimum noise levels during speed control, an auto transformer speed control is recommended.

Accessories
A full range of accessories:

  • Electronic Speed Controllers
  • Auto Transformer Speed Controllers
  • D.O.L. Starters & overloads
  • Ancillary Packs (comprising:- 4 AVM's, 2 mounting feet, 2 matching flanges, 2 flexible connectors + clips)
  • Wire Guards
  • Attenuators
  • Mounting Feet
  • Matching Flanges
  • Anti Vibration Mounts
  • Louvre Shutters

Technical

DIMENSIONS:

Size a b c d e n Kg
250 254 286 306 110 7 8 5
315 316.5 356 382 135 9.5 8 6.1
355 356 395 421 135 9.5 8 7.1
400 400 438 466 155 9.5 12 8.1
450 451 487 515 160 9.5 12 13.4
500 503 541 567 166 9.5 12 15.7
560 559 605 635 210 11.5 16 20.1
630 634 674 707 220 11.5 16 44
710 711 751 785 260 11.5 16 31
800 797 837 871 280 11.5 24 39
1000 1001 1043 1080 330 11.5 24 73

Downloads

Related Products

Useful links