Traditional T-Series - Panel/Ceiling Models

• Extract/intake model in 4 sizes: 6”, 7”, 9” and 12”
• Colour: soft tone grey
• Patented electronic shutter system ensures quiet trouble-free operation
• For the very best from your fan use the Ecotronic controller
• East fit connector Top Socket, standard on all models

Select a product

UK’s No. 1 Commercial Fan

Vent-Axia T-Series Panel/Ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvre grilles, through external walls. When installed only the louvre grille is visible. The range features a unique speed control pack which enables high, medium or low speed to be reset to suit a specific room size or required duty.

T-Series controllers may be used with this model to obtain a choice of speeds, reversible airflow direction and automatic sensor operation. When used with a controller, the speed control pack is removed from the T-Series fan and fitted into the 3-pin socket in the back of the controller. The Vent-Axia Ecotronic controller gives even greater running economy with its minimum speed setting on ‘E’ mode and infinitely variable speed control. For this controller the speed control pack remains in the fan.

Electrical

Suitable for operation in ambient temperatures from -40°C to +50°C. Fitted with Standard Thermal Overload Protection (S.T.O.P).

Supply voltage: 220-240V/1/50Hz.

Top Socket

A connector Top Socket is standard on all T-Series fans allowing fast and trouble-free mains connection.

Shutter

With energy saving in mind, panel/ceiling kits are supplied complete with an integral instantaneous automatic louvre shutter concealed behind the interior grille. It will operate on both intake and extract and at any angle of mounting. When the fan is used with a T-Series or Ecotronic controller, the shutter can be set open with the fan motor switched off to provide natural ventilation without the security risk of an open window.

Easy Cleaning

Integrated component design allows all parts to be dismantled for cleaning without the use of specialist tools.

5 years product warranty provided on units purchased from the 1st August 2018.

Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.

DIMENSIONS:

Size 6 (150mm) 7 (190mm) 9 (230mm) 12 (300mm)
A 310 352 391 470
B 303 345 388 467
C 117 117 129 152
D 32 32 39 41
E 220 258 302 378
F 226 265 304 381
GØ 180 218 255 334
HØ 171 210 247 325
J 267 306 345 422
K 231 270 309 386
L 244 282 326 402
M 85 104 126 164
Weight (kg) 3.50 3.82 5.13 7.44
 
 
Image of TX6PL
TX6PL
T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvred grilles, through external walls. When installed only the louvred grille is visible.
Stock Ref. No: W161610
Price £556.22 (excl VAT)
Image of TX7PL
TX7PL
T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvred grilles, through external walls. When installed only the louvred grille is visible.
Stock Ref. No: W162610
Price £714.91 (excl VAT)
Image of TX9PL
TX9PL
T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvred grilles, through external walls. When installed only the louvred grille is visible.
Stock Ref. No: W163610
Price £917.23 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of TX12PL
TX12PL
T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvred grilles, through external walls. When installed only the louvred grille is visible.
Stock Ref. No: W164610
Price £1263.67 (excl VAT)
Image of T-Series Controller
T-Series Controller
Three speeds. Choice of extract/intake Shutter open, fan Off setting Sensor mode. Enables external electro mechanical switches, eg: Ecotronic, HumidiSwitch, ThermoSwitch and TimeSwitch to control the fan.
Stock Ref. No: W361119
Price £197.53 (excl VAT)
Image of Ecotronic Controller
Ecotronic Controller

For groups of units of any one size up to a total of 400 watts. Do not mix T-Series with Standard Range ventilating units on one controller.

Stock Ref. No: W362320
Price £270.74 (excl VAT)
Image of Air Quality Sensor (AQS)
Air Quality Sensor (AQS)

Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.

Stock Ref. No: 432953
Price £386.52 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon

Designed specifically for the Lo-Carbon product range. This self programming electronic On/Off wall mounted humidity sensor reacts to any rapid increase in humidity and temperature by switching a VentAxia fan ‘On’ for rapid removal of moisture laden air in domestic bathrooms and kitchens. Night time relative humidity increment setback feature suppresses nuisance tripping when the humidity level gradually rises as the temperature falls.

  • Pullcord override and neon indicator.
  • Changeover relay switch.
  • Operating range: 30%-90%RH.
  • Ambient operating temperature +5°C to +40°C.
  • Dimensions: 87 x 87 x 33mm (H x W x D).
  • Will fit single gang box for surface mounting.
Stock Ref. No: 563552
Price £354.44 (excl VAT)
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)

Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.

Stock Ref. No: 432949
Price £192.74 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of Air Quality Sensor
Air Quality Sensor
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches the fan On when the air quality declines below an adjustable preset level. This is registered by the ceramic sensing head which is self-cleansing, a process which occurs every time the unit is triggered. When the atmosphere has returned to normal, the fan will continue to run for a pre-set period (adjustable between 1-25 minutes) and then switch Off. The air quality sensor should not be used for the detection of combustible gases and is not designed for use as a smoke detector in an alarm system. The AQS is compatible with T-Series, Multi-Unit, Rangemaster, Ecotronic and TimeSwitch controllers. Features & Benefits: Ambient operating temp range 0°C to +40°C. DEMKO Approved. Dimensions: 87 x 157 x 47mm (H x W x D). Supply voltage 220-240V/1/50Hz Surface mounted. Downloads Catalogue Pages
Stock Ref. No: 563506
Price £409.73 (excl VAT)

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

UK’s No. 1 Commercial Fan

Vent-Axia T-Series Panel/Ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvre grilles, through external walls. When installed only the louvre grille is visible. The range features a unique speed control pack which enables high, medium or low speed to be reset to suit a specific room size or required duty.

T-Series controllers may be used with this model to obtain a choice of speeds, reversible airflow direction and automatic sensor operation. When used with a controller, the speed control pack is removed from the T-Series fan and fitted into the 3-pin socket in the back of the controller. The Vent-Axia Ecotronic controller gives even greater running economy with its minimum speed setting on ‘E’ mode and infinitely variable speed control. For this controller the speed control pack remains in the fan.

Electrical

Suitable for operation in ambient temperatures from -40°C to +50°C. Fitted with Standard Thermal Overload Protection (S.T.O.P).

Supply voltage: 220-240V/1/50Hz.

Top Socket

A connector Top Socket is standard on all T-Series fans allowing fast and trouble-free mains connection.

Shutter

With energy saving in mind, panel/ceiling kits are supplied complete with an integral instantaneous automatic louvre shutter concealed behind the interior grille. It will operate on both intake and extract and at any angle of mounting. When the fan is used with a T-Series or Ecotronic controller, the shutter can be set open with the fan motor switched off to provide natural ventilation without the security risk of an open window.

Easy Cleaning

Integrated component design allows all parts to be dismantled for cleaning without the use of specialist tools.

5 years product warranty provided on units purchased from the 1st August 2018.

Technical

Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.

DIMENSIONS:

Size 6 (150mm) 7 (190mm) 9 (230mm) 12 (300mm)
A 310 352 391 470
B 303 345 388 467
C 117 117 129 152
D 32 32 39 41
E 220 258 302 378
F 226 265 304 381
GØ 180 218 255 334
HØ 171 210 247 325
J 267 306 345 422
K 231 270 309 386
L 244 282 326 402
M 85 104 126 164
Weight (kg) 3.50 3.82 5.13 7.44
 
 

Models

Image of TX6PL
TX6PL
T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvred grilles, through external walls. When installed only the louvred grille is visible.
Stock Ref. No: W161610
Price £556.22 (excl VAT)
Image of TX7PL
TX7PL
T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvred grilles, through external walls. When installed only the louvred grille is visible.
Stock Ref. No: W162610
Price £714.91 (excl VAT)
Image of TX9PL
TX9PL
T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvred grilles, through external walls. When installed only the louvred grille is visible.
Stock Ref. No: W163610
Price £917.23 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of TX12PL
TX12PL
T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvred grilles, through external walls. When installed only the louvred grille is visible.
Stock Ref. No: W164610
Price £1263.67 (excl VAT)

Accessories

Image of T-Series Controller
T-Series Controller
Three speeds. Choice of extract/intake Shutter open, fan Off setting Sensor mode. Enables external electro mechanical switches, eg: Ecotronic, HumidiSwitch, ThermoSwitch and TimeSwitch to control the fan.
Stock Ref. No: W361119
Price £197.53 (excl VAT)
Image of Ecotronic Controller
Ecotronic Controller

For groups of units of any one size up to a total of 400 watts. Do not mix T-Series with Standard Range ventilating units on one controller.

Stock Ref. No: W362320
Price £270.74 (excl VAT)
Image of Air Quality Sensor (AQS)
Air Quality Sensor (AQS)

Automatically reacts to the deterioration of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas, such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches when the air quality declines below an adjustable preset level. This is registered by a self-cleaning ceramic sensing head. The air quality sensor should not be used for the detection of combustible gases. Ambient operating temperature range 0°C to +50°C. MIN - MAX mode or direct Damper control. Dimensions:87 x 157 x 47mm (H xWxD) Surface mounted. 1 - 25 min O/R timer. Supply voltage 24V DC SELV.

Stock Ref. No: 432953
Price £386.52 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of Ambient Response Humidity Sensor Lo-Carbon
Ambient Response Humidity Sensor Lo-Carbon

Designed specifically for the Lo-Carbon product range. This self programming electronic On/Off wall mounted humidity sensor reacts to any rapid increase in humidity and temperature by switching a VentAxia fan ‘On’ for rapid removal of moisture laden air in domestic bathrooms and kitchens. Night time relative humidity increment setback feature suppresses nuisance tripping when the humidity level gradually rises as the temperature falls.

  • Pullcord override and neon indicator.
  • Changeover relay switch.
  • Operating range: 30%-90%RH.
  • Ambient operating temperature +5°C to +40°C.
  • Dimensions: 87 x 87 x 33mm (H x W x D).
  • Will fit single gang box for surface mounting.
Stock Ref. No: 563552
Price £354.44 (excl VAT)
Image of Ecotronic Humidity Sensor (Sentinel)
Ecotronic Humidity Sensor (Sentinel)

Humidity Control is automatic and can be set to switch between 65 and 90%RH. An integral pullcord provides a manual override function if required. Can be wired for either ON/OFF or Trickle Boost operation. Set Point adjustable. Maximum switching load 1 amp inductive. Pullcord override indicator Ambient operating temperature 0°C to +40°C. Dimensions:87 x 87 x 33mm (H x W x D). Supply voltage 24V DC SELV. Humidity sensors should be sited approx. 100mm below ceiling level and not above cupboards, refer to siting details in fitting and wiring instructions supplied with product.

Stock Ref. No: 432949
Price £192.74 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of Air Quality Sensor
Air Quality Sensor
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches the fan On when the air quality declines below an adjustable preset level. This is registered by the ceramic sensing head which is self-cleansing, a process which occurs every time the unit is triggered. When the atmosphere has returned to normal, the fan will continue to run for a pre-set period (adjustable between 1-25 minutes) and then switch Off. The air quality sensor should not be used for the detection of combustible gases and is not designed for use as a smoke detector in an alarm system. The AQS is compatible with T-Series, Multi-Unit, Rangemaster, Ecotronic and TimeSwitch controllers. Features & Benefits: Ambient operating temp range 0°C to +40°C. DEMKO Approved. Dimensions: 87 x 157 x 47mm (H x W x D). Supply voltage 220-240V/1/50Hz Surface mounted. Downloads Catalogue Pages
Stock Ref. No: 563506
Price £409.73 (excl VAT)

Downloads

Related Products

Useful links