Lo-Carbon T-Series Window Fan
• Reduces your carbon footprint
• Extract/intake model in 2 sizes: 9” and 12”
• Long life Lo-Carbon motor lasts twice as long as conventional motors
• Up to 70% energy saving
• Easy fit connector Top Socket, standard on all models
Select a product
UK’s No. 1 Commercial Fan
The Lo-Carbon T-Series Fan range utilises a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
Window Fan
The fitting kit is designed for installation through single or double glazing and material up to 32mm thick. Greater thicknesses can be accommodated using extended fixing rod sets. Alternatively, the Lo-Carbon T-Series range can be used in conjunction with Vent-Axia ventilation accessories in flexible and rigid ducting systems to suit individual requirements. It can also be mounted in a fixing plate on walls or above ceilings.
Instantaneous Shutter
With energy saving in mind, units are supplied complete with an integral instantaneous automatic louvre shutter concealed behind the interior grille. It operates on both extract and intake and at any angle of mounting.
The shutter is electronically controlled by an actuator with a damped action giving quiet operation during instant opening and closing. The interlocking edges of the shutter blades provide maximum back draught protection. When the fan is used with the Lo-Carbon T-Series controller, the shutter can be set open with the fan motor switched Off to provide natural ventilation without the security risk of an open window.
Top Socket
A connector Top Socket is standard on all T-Series fans. Allowing fast and trouble-free mains connection.
Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.
PERFORMANCE:
| Model | Extract m3/h (Low) | Extract m3/h (Med) | Extract m3/h (High) | Watts (high) | Sound dB(A) | Amps @240V |
| Lo-Carbon TX9WW Wired | 322 | 571 | 761 | 30.8 | 40 | 0.35 |
| Lo-Carbon TX12WW Wired | 660 | 1295 | 1550 | 68.6 | 46 | 0.73 |
DIMENSIONS:
| Size | A | B | C | D | E | F | Fixing Hole | Weight kg |
| 230mm | 39 | 150 | 304 | 302 | 19 | 54 | 260 | 5.35 |
| 300mm | 41 | 177 | 381 | 378 | 19 | 54 | 337 | 7.74 |
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
Every LoWatt T-Series Wire-less FM Controller uses unique digital signals to ensure trouble free operation. The controller will transmit through walls and floors allowing complete flexibility of design to control fans up to 30m away. Wire-less FM Controllers can dramatically reduce installation time and costs. The Immediate benefit being the elimination of unsightly wiring. Wire-less FM Controllers can be easily installed in an variety of applications including assembly rooms, banks, hospitals, laboratories, restaurants, schools, shops and public houses.
Lo-Carbon T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors. Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.
240VAC 50Hz.
European Patent No: 2298057
An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90% relative humidity. Can be wired into controller ‘Auto’ mode connections. Incorporates changeover switch to select low/high speed.
- Setting range 65% - 90%RH.
- Maximum switching load 1 Amp inductive.
- Pullcord override indicated by lamp.
- Ambient operating temperature 0°C to +40°C.
- Dimensions: 87 x 87 x 33mm. (H x W x D).
- Supply voltage 220-240V/1/50Hz.
A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Visionex PIR can be wired for either On/Off or Trickle/ Boost operation.
- Fits any UK single gang mounting box.
- Adjustable timer overrun (5-25 minutes).
- Range of detection up to 10 metres.
- Designed to meet IP43.
- Ambient operating temperature range 0°C to +50°C.
- Maximum load: 2.5 amps/600W inductive. Not suitable for use with lighting.
- Internal use only.
- No switched live required for internal rooms and WCs.
- Double insulated.
- Volt-free contacts.
- Supply voltage 220-240V/1/50Hz.
Raadpleeg de tab Downloads voor technische informatie
ESTIMATED RUNNING COSTS
Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model
Based on the inputted figures, estimated running costs would be:
Overview
UK’s No. 1 Commercial Fan
The Lo-Carbon T-Series Fan range utilises a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
Window Fan
The fitting kit is designed for installation through single or double glazing and material up to 32mm thick. Greater thicknesses can be accommodated using extended fixing rod sets. Alternatively, the Lo-Carbon T-Series range can be used in conjunction with Vent-Axia ventilation accessories in flexible and rigid ducting systems to suit individual requirements. It can also be mounted in a fixing plate on walls or above ceilings.
Instantaneous Shutter
With energy saving in mind, units are supplied complete with an integral instantaneous automatic louvre shutter concealed behind the interior grille. It operates on both extract and intake and at any angle of mounting.
The shutter is electronically controlled by an actuator with a damped action giving quiet operation during instant opening and closing. The interlocking edges of the shutter blades provide maximum back draught protection. When the fan is used with the Lo-Carbon T-Series controller, the shutter can be set open with the fan motor switched Off to provide natural ventilation without the security risk of an open window.
Top Socket
A connector Top Socket is standard on all T-Series fans. Allowing fast and trouble-free mains connection.
Technical
Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.
PERFORMANCE:
| Model | Extract m3/h (Low) | Extract m3/h (Med) | Extract m3/h (High) | Watts (high) | Sound dB(A) | Amps @240V |
| Lo-Carbon TX9WW Wired | 322 | 571 | 761 | 30.8 | 40 | 0.35 |
| Lo-Carbon TX12WW Wired | 660 | 1295 | 1550 | 68.6 | 46 | 0.73 |
DIMENSIONS:
| Size | A | B | C | D | E | F | Fixing Hole | Weight kg |
| 230mm | 39 | 150 | 304 | 302 | 19 | 54 | 260 | 5.35 |
| 300mm | 41 | 177 | 381 | 378 | 19 | 54 | 337 | 7.74 |
Models
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
The Lo-Carbon T-Series range is fitted with a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.
Accessories
Every LoWatt T-Series Wire-less FM Controller uses unique digital signals to ensure trouble free operation. The controller will transmit through walls and floors allowing complete flexibility of design to control fans up to 30m away. Wire-less FM Controllers can dramatically reduce installation time and costs. The Immediate benefit being the elimination of unsightly wiring. Wire-less FM Controllers can be easily installed in an variety of applications including assembly rooms, banks, hospitals, laboratories, restaurants, schools, shops and public houses.
Lo-Carbon T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors. Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.
240VAC 50Hz.
European Patent No: 2298057
An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90% relative humidity. Can be wired into controller ‘Auto’ mode connections. Incorporates changeover switch to select low/high speed.
- Setting range 65% - 90%RH.
- Maximum switching load 1 Amp inductive.
- Pullcord override indicated by lamp.
- Ambient operating temperature 0°C to +40°C.
- Dimensions: 87 x 87 x 33mm. (H x W x D).
- Supply voltage 220-240V/1/50Hz.
A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Visionex PIR can be wired for either On/Off or Trickle/ Boost operation.
- Fits any UK single gang mounting box.
- Adjustable timer overrun (5-25 minutes).
- Range of detection up to 10 metres.
- Designed to meet IP43.
- Ambient operating temperature range 0°C to +50°C.
- Maximum load: 2.5 amps/600W inductive. Not suitable for use with lighting.
- Internal use only.
- No switched live required for internal rooms and WCs.
- Double insulated.
- Volt-free contacts.
- Supply voltage 220-240V/1/50Hz.
Downloads
Related Products
Useful links
-
Trade Counter
Click here -
Brochures
Click here -
Legislation
Click here -
Contact Us
Click here -
About Us
Click here -
Downloads
Click here