Lo-Carbon T-Series Panel Fan

• Reduces your carbon footprint
• Extract / intake model in 2 sizes: 9” and 12”
• Long life Lo-Carbon motor last twice as long as other conventional motors
• Up to 70% energy saving
• Easy fit connector Top Socket, standard on all models

Select a product

UK’s No. 1 Commercial Fan

The Lo-Carbon T-Series Fan range utilises a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.

Panel Fitting Kit

Lo-Carbon T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvre grilles, through external walls. When installed only the louvre grille is visible.

Instantaneous Shutter

With energy saving in mind, Lo-Carbon T-Series models are supplied complete with an integral instantaneous automatic louvre shutter concealed behind the interior grille. With a Lo-Carbon T-Series Controller the fan will operate on both extract and intake, suitable for any angle of mounting. When the fan is used with a Lo-Carbon T-Series controller, the shutter can be set open with the fan motor switched off to provide natural ventilation without the security risk of an open window.

Top Socket

A connector Top Socket is standard on all T-Series fans. Allowing fast and trouble-free mains connection.

Electrical

Suitable for operation in ambient temperatures from -40°C to +50°C. Fitted with self resetting Standard Thermal Overload Protection (S.T.O.P). Supply voltage: 220-240V/1/50Hz.

Easy Cleaning

Integrated component design allows all parts to be dismantled for cleaning without the use of specialist tools.

Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.

PERFORMANCE:

Unit Size   LoWatt TX9PL Wireless LoWatt TX9PL
Stock Ref. No.   45 61 71 45 61 67
Amps @ 240V   0.33 0.33
Extract Performance m³/h Low 357 357
Extract Performance m³/h Med 601 601
Extract Performance m³/h High 799 799
Watts (high)   30 30
dB(A) (med) @ 3m   41 41
 
---
 
Unit Size   LoWatt TX12PL Wireless LoWatt TX12PL
Stock Ref. No.   45 61 79 45 61 75
Amps @ 240V   0.70 0.70
Extract Performance m³/h Low 737 737
Extract Performance m³/h Med 1481 1481
Extract Performance m³/h High 1761 1761
Watts (high)   67 67
dB(A) (med) @ 3m   48 48
---
Recommended controller:
Wired Controller Stock Ref. No. 45 58 73
 
 

DIMENSIONS:

Size A B C D E F G H J K L M Weight kg
230mm 391 388 129 39 302 304 255 247 345 309 326 126 5.13
300mm 470 467 152 41 378 381 334 325 422 386 402 164 7.44
 
 
Image of Lo-Carbon TX9PL Wireless
Lo-Carbon TX9PL Wireless

Lo-Carbon T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvre grilles, through external walls. When installed only the louvre grille is visible.

Stock Ref. No: 456171
Price £983.39 (excl VAT)
This Model no longer available
Image of Lo-Carbon TX9PL
Lo-Carbon TX9PL
Lo-Carbon T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvre grilles, through external walls. When installed only the louvre grille is visible.
Stock Ref. No: 456167
Price £869.41 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of Lo-Carbon TX12PL Wireless
Lo-Carbon TX12PL Wireless

Lo-Carbon T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvre grilles, through external walls. When installed only the louvre grille is visible.

Stock Ref. No: 456179
This Model no longer available
Image of Lo-Carbon TX12PL
Lo-Carbon TX12PL
Lo-Carbon T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvre grilles, through external walls. When installed only the louvre grille is visible.
Stock Ref. No: 456175
Price £1197.92 (excl VAT)
Image of Wireless Controller for Lo-Carbon T-Series Range
Wireless Controller for Lo-Carbon T-Series Range

Every LoWatt T-Series Wire-less FM Controller uses unique digital signals to ensure trouble free operation. The controller will transmit through walls and floors allowing complete flexibility of design to control fans up to 30m away. Wire-less FM Controllers can dramatically reduce installation time and costs. The Immediate benefit being the elimination of unsightly wiring. Wire-less FM Controllers can be easily installed in an variety of applications including assembly rooms, banks, hospitals, laboratories, restaurants, schools, shops and public houses.

Stock Ref. No: 455874
This Model no longer available
Image of Wired Controller for Lo-Carbon T-Series Range
Wired Controller for Lo-Carbon T-Series Range

Lo-Carbon T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors. Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.

Stock Ref. No: 455873
Price £183.64 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of Ambient Response Humidity Sensor
Ambient Response Humidity Sensor

240VAC 50Hz. 

European Patent No: 2298057

Stock Ref. No: 563550
Price £340.97 (excl VAT)
Image of Ecotronic Humidity Sensor
Ecotronic Humidity Sensor

An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90% relative humidity. Can be wired into controller ‘Auto’ mode connections. Incorporates changeover switch to select low/high speed.

  • Setting range 65% - 90%RH.
  • Maximum switching load 1 Amp inductive.
  • Pullcord override indicated by lamp.
  • Ambient operating temperature 0°C to +40°C.
  • Dimensions: 87 x 87 x 33mm. (H x W x D).
  • Supply voltage 220-240V/1/50Hz.
Stock Ref. No: 563532
Price £189.40 (excl VAT)
Image of Air Quality Sensor
Air Quality Sensor
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches the fan On when the air quality declines below an adjustable preset level. This is registered by the ceramic sensing head which is self-cleansing, a process which occurs every time the unit is triggered. When the atmosphere has returned to normal, the fan will continue to run for a pre-set period (adjustable between 1-25 minutes) and then switch Off. The air quality sensor should not be used for the detection of combustible gases and is not designed for use as a smoke detector in an alarm system. The AQS is compatible with T-Series, Multi-Unit, Rangemaster, Ecotronic and TimeSwitch controllers. Features & Benefits: Ambient operating temp range 0°C to +40°C. DEMKO Approved. Dimensions: 87 x 157 x 47mm (H x W x D). Supply voltage 220-240V/1/50Hz Surface mounted. Downloads Catalogue Pages
Stock Ref. No: 563506
Price £394.16 (excl VAT)
Image of Vent-Axia Visionex PIR
Vent-Axia Visionex PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Visionex PIR can be wired for either On/Off or Trickle/ Boost operation.

  • Fits any UK single gang mounting box.
  • Adjustable timer overrun (5-25 minutes).
  • Range of detection up to 10 metres.
  • Designed to meet IP43.
  • Ambient operating temperature range 0°C to +50°C.
  • Maximum load: 2.5 amps/600W inductive. Not suitable for use with lighting.
  • Internal use only.
  • No switched live required for internal rooms and WCs.
  • Double insulated.
  • Volt-free contacts.
  • Supply voltage 220-240V/1/50Hz.
Stock Ref. No: 459623
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

UK’s No. 1 Commercial Fan

The Lo-Carbon T-Series Fan range utilises a low energy DC motor, developed to improve performance, lower running costs and maintain T-Series’ rugged reliability.

Panel Fitting Kit

Lo-Carbon T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvre grilles, through external walls. When installed only the louvre grille is visible.

Instantaneous Shutter

With energy saving in mind, Lo-Carbon T-Series models are supplied complete with an integral instantaneous automatic louvre shutter concealed behind the interior grille. With a Lo-Carbon T-Series Controller the fan will operate on both extract and intake, suitable for any angle of mounting. When the fan is used with a Lo-Carbon T-Series controller, the shutter can be set open with the fan motor switched off to provide natural ventilation without the security risk of an open window.

Top Socket

A connector Top Socket is standard on all T-Series fans. Allowing fast and trouble-free mains connection.

Electrical

Suitable for operation in ambient temperatures from -40°C to +50°C. Fitted with self resetting Standard Thermal Overload Protection (S.T.O.P). Supply voltage: 220-240V/1/50Hz.

Easy Cleaning

Integrated component design allows all parts to be dismantled for cleaning without the use of specialist tools.

Technical

Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.

PERFORMANCE:

Unit Size   LoWatt TX9PL Wireless LoWatt TX9PL
Stock Ref. No.   45 61 71 45 61 67
Amps @ 240V   0.33 0.33
Extract Performance m³/h Low 357 357
Extract Performance m³/h Med 601 601
Extract Performance m³/h High 799 799
Watts (high)   30 30
dB(A) (med) @ 3m   41 41
 
---
 
Unit Size   LoWatt TX12PL Wireless LoWatt TX12PL
Stock Ref. No.   45 61 79 45 61 75
Amps @ 240V   0.70 0.70
Extract Performance m³/h Low 737 737
Extract Performance m³/h Med 1481 1481
Extract Performance m³/h High 1761 1761
Watts (high)   67 67
dB(A) (med) @ 3m   48 48
---
Recommended controller:
Wired Controller Stock Ref. No. 45 58 73
 
 

DIMENSIONS:

Size A B C D E F G H J K L M Weight kg
230mm 391 388 129 39 302 304 255 247 345 309 326 126 5.13
300mm 470 467 152 41 378 381 334 325 422 386 402 164 7.44
 
 

Models

Image of Lo-Carbon TX9PL Wireless
Lo-Carbon TX9PL Wireless

Lo-Carbon T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvre grilles, through external walls. When installed only the louvre grille is visible.

Stock Ref. No: 456171
Price £983.39 (excl VAT)
This Model no longer available
Image of Lo-Carbon TX9PL
Lo-Carbon TX9PL
Lo-Carbon T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvre grilles, through external walls. When installed only the louvre grille is visible.
Stock Ref. No: 456167
Price £869.41 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of Lo-Carbon TX12PL Wireless
Lo-Carbon TX12PL Wireless

Lo-Carbon T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvre grilles, through external walls. When installed only the louvre grille is visible.

Stock Ref. No: 456179
This Model no longer available
Image of Lo-Carbon TX12PL
Lo-Carbon TX12PL
Lo-Carbon T-Series panel/ceiling models are suitable for mounting at any angle in internal partitions, ceilings, ducts and, with louvre grilles, through external walls. When installed only the louvre grille is visible.
Stock Ref. No: 456175
Price £1197.92 (excl VAT)

Accessories

Image of Wireless Controller for Lo-Carbon T-Series Range
Wireless Controller for Lo-Carbon T-Series Range

Every LoWatt T-Series Wire-less FM Controller uses unique digital signals to ensure trouble free operation. The controller will transmit through walls and floors allowing complete flexibility of design to control fans up to 30m away. Wire-less FM Controllers can dramatically reduce installation time and costs. The Immediate benefit being the elimination of unsightly wiring. Wire-less FM Controllers can be easily installed in an variety of applications including assembly rooms, banks, hospitals, laboratories, restaurants, schools, shops and public houses.

Stock Ref. No: 455874
This Model no longer available
Image of Wired Controller for Lo-Carbon T-Series Range
Wired Controller for Lo-Carbon T-Series Range

Lo-Carbon T-Series Controllers are available in both Wired and Wire-less FM versions. The three speed push button surface mounted controllers provide intake/extract and shutter only options and auto mode position for use with external sensors. Wired versions are connected to the fan using a plug-in Safety Extra Low Voltage 2-core signal cable supplied (10m), allowing simple and safe installation. Alternatively, the Wire-less FM controller offers full control without the need for any wiring, ideal for premises where installations need to be carried out with minimum disruption or where surface wiring can be classed as unsightly or obtrusive.

Stock Ref. No: 455873
Price £183.64 (excl VAT)
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor
Image of Ambient Response Humidity Sensor
Ambient Response Humidity Sensor

240VAC 50Hz. 

European Patent No: 2298057

Stock Ref. No: 563550
Price £340.97 (excl VAT)
Image of Ecotronic Humidity Sensor
Ecotronic Humidity Sensor

An adjustable set point, solid state On/Off sensor. A pullcord provides manual override, indicated by lamp. Adjustable from 65 to 90% relative humidity. Can be wired into controller ‘Auto’ mode connections. Incorporates changeover switch to select low/high speed.

  • Setting range 65% - 90%RH.
  • Maximum switching load 1 Amp inductive.
  • Pullcord override indicated by lamp.
  • Ambient operating temperature 0°C to +40°C.
  • Dimensions: 87 x 87 x 33mm. (H x W x D).
  • Supply voltage 220-240V/1/50Hz.
Stock Ref. No: 563532
Price £189.40 (excl VAT)
Image of Air Quality Sensor
Air Quality Sensor
Automatically reacts to the depletion of air quality, sensing tobacco smoke, smells and toilet odours to regulate mechanically ventilated areas such as cinemas, pubs, clubs, restaurants, kitchens, toilets and conference rooms. The sensor switches the fan On when the air quality declines below an adjustable preset level. This is registered by the ceramic sensing head which is self-cleansing, a process which occurs every time the unit is triggered. When the atmosphere has returned to normal, the fan will continue to run for a pre-set period (adjustable between 1-25 minutes) and then switch Off. The air quality sensor should not be used for the detection of combustible gases and is not designed for use as a smoke detector in an alarm system. The AQS is compatible with T-Series, Multi-Unit, Rangemaster, Ecotronic and TimeSwitch controllers. Features & Benefits: Ambient operating temp range 0°C to +40°C. DEMKO Approved. Dimensions: 87 x 157 x 47mm (H x W x D). Supply voltage 220-240V/1/50Hz Surface mounted. Downloads Catalogue Pages
Stock Ref. No: 563506
Price £394.16 (excl VAT)
Image of Vent-Axia Visionex PIR
Vent-Axia Visionex PIR

A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Visionex PIR can be wired for either On/Off or Trickle/ Boost operation.

  • Fits any UK single gang mounting box.
  • Adjustable timer overrun (5-25 minutes).
  • Range of detection up to 10 metres.
  • Designed to meet IP43.
  • Ambient operating temperature range 0°C to +50°C.
  • Maximum load: 2.5 amps/600W inductive. Not suitable for use with lighting.
  • Internal use only.
  • No switched live required for internal rooms and WCs.
  • Double insulated.
  • Volt-free contacts.
  • Supply voltage 220-240V/1/50Hz.
Stock Ref. No: 459623
(Please call 0344 856 0590 0344 856 0590 for further availability information)

Find a Distributor

Downloads

Related Products

Useful links