Integra Plus EC
- Heat recovery unit for larger residential or commercial applications
- Up to 70% heat recovery
- Low power consumption
- Effective condensation control
- 3 speed control
- Summer mode
- EC motors
Select a product
Easy Installation
The Vent-Axia Integra Plus EC is designed for mounting in ceiling voids, lofts and above a suspended ceiling. Four 150mm spigots are provided for simple connection to insulated flexible or rigid ventilation ducting. The unit comes complete with a 22mm condensate outlet.
The Integra Plus EC incorporates two adjustable speeds and a Purge setting (full Speed).
Switching on the controller allows activation of the Summer Mode.
PERFORMANCE:
Performance: Maximum ventilation rate 486m3/hr, 135l/s
N° speed settings: 3 fully variable
DIMENSIONS:
Weight: 17Kg fan box
| A | ØB | C | D | E | F | G | H | I |
| 580 | 150 | 100 | 64 | 125 | 350 | 125 | 305 | 85 |
240VAC 50Hz.
European Patent No: 2298057
A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Visionex PIR can be wired for either On/Off or Trickle/ Boost operation.
- Fits any UK single gang mounting box.
- Adjustable timer overrun (5-25 minutes).
- Range of detection up to 10 metres.
- Designed to meet IP43.
- Ambient operating temperature range 0°C to +50°C.
- Maximum load: 2.5 amps/600W inductive. Not suitable for use with lighting.
- Internal use only.
- No switched live required for internal rooms and WCs.
- Double insulated.
- Volt-free contacts.
- Supply voltage 220-240V/1/50Hz.
3D REVIT FILES:
Raadpleeg de tab Downloads voor technische informatie
ESTIMATED RUNNING COSTS
Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model
Based on the inputted figures, estimated running costs would be:
Overview
Easy Installation
The Vent-Axia Integra Plus EC is designed for mounting in ceiling voids, lofts and above a suspended ceiling. Four 150mm spigots are provided for simple connection to insulated flexible or rigid ventilation ducting. The unit comes complete with a 22mm condensate outlet.
The Integra Plus EC incorporates two adjustable speeds and a Purge setting (full Speed).
Switching on the controller allows activation of the Summer Mode.
Technical
PERFORMANCE:
Performance: Maximum ventilation rate 486m3/hr, 135l/s
N° speed settings: 3 fully variable
DIMENSIONS:
Weight: 17Kg fan box
| A | ØB | C | D | E | F | G | H | I |
| 580 | 150 | 100 | 64 | 125 | 350 | 125 | 305 | 85 |
Models
Accessories
240VAC 50Hz.
European Patent No: 2298057
A wall or ceiling mounted movement detector for use with any domestic Vent-Axia mains voltage product. Also suitable for use with Vent-Axia T-Series controllers on ‘Auto’ setting and ITC controllers on sensor mode. Visionex PIR can be wired for either On/Off or Trickle/ Boost operation.
- Fits any UK single gang mounting box.
- Adjustable timer overrun (5-25 minutes).
- Range of detection up to 10 metres.
- Designed to meet IP43.
- Ambient operating temperature range 0°C to +50°C.
- Maximum load: 2.5 amps/600W inductive. Not suitable for use with lighting.
- Internal use only.
- No switched live required for internal rooms and WCs.
- Double insulated.
- Volt-free contacts.
- Supply voltage 220-240V/1/50Hz.
Downloads
3D REVIT FILES:
Related Products
Useful links
-
Trade Counter
Click here -
Brochures
Click here -
Legislation
Click here -
Contact Us
Click here -
About Us
Click here -
Downloads
Click here