Lo-Carbon Sentinel Kinetic BH
• Recognised in SAP PCDB
• Lightweight for easier installation
• Horizontal duct option for space-saving installations
• Fits within a 290mm deep kitchen cupboard
• Integrated digital controller for simple and accurate commissioning
• Plug and play controls; Humidistat
• BMS connectivity
• LS inputs (Light Switch)
• Horizontal duct options
• Acoustic Enclosure option for reduced breakout noise
• Acoustic Top Box option for reduced in-duct noise
Select a product
Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm.
For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies.
Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simplyremoving the control panel, rotating the unit 180 degrees and re-attaching the control panel.
Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom ofthe unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.
Integral Humidity Sensor (BH Models)
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.
Acoustic Solution
This product is available with acoustic enclosure. For more info please click here.
Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.
High efficiency, compact, recognised in SAP PCDB, residential Mechanical Ventilation with Heat Recovery unit (non-summer bypass model)
High efficiency, compact, SAP PCDB eligible, residential Mechanical Ventilation with Heat Recovery unit. With Summer Bypass and Integral Built-In Humidistat.
The Acoustic Enclosure reduces breakout noise from the MVHR unit, ensuring occupants are not disturbed by system noise throughout the dwelling. It features internal anti-vibration mounts which prevent vibration passing from the unit through the fabric of the building. The Acoustic Top Box reduces in-duct noise in living areas, bedrooms and wet rooms. It also provides a neat enclosure for ductwork at the point of installation.
The Acoustic Top Box reduces in-duct noise in living areas, bedrooms and wet rooms. It also provides a neat enclosure for ductwork at the point of installation.
The Acoustic Enclosure reduces breakout noise from the MVHR unit, ensuring occupants are not disturbed by system noise throughout the dwelling. It features internal anti-vibration mounts which prevent vibration passing from the unit through the fabric of the building.
High efficiency, compact, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit. With Summer Bypass and Integral Built-In Humidistat.
The Acoustic Enclosure reduces breakout noise from the MVHR unit, ensuring occupants are not disturbed by system noise throughout the dwelling. It features internal anti-vibration mounts which prevent vibration passing from the unit through the fabric of the building. The Acoustic Top Box reduces in-duct noise in living areas, bedrooms and wet rooms. It also provides a neat enclosure for ductwork at the point of installation.
The Acoustic Top Box reduces in-duct noise in living areas, bedrooms and wet rooms. It also provides a neat enclosure for ductwork at the point of installation.
The Acoustic Enclosure reduces breakout noise from the MVHR unit, ensuring occupants are not disturbed by system noise throughout the dwelling. It features internal anti-vibration mounts which prevent vibration passing from the unit through the fabric of the building.
High efficiency, compact, SAP PCDB eligable, residential Mechanical Ventilation with Heat Recovery unit. With Summer Bypass.
High efficiency, compact, SAP PCDB eligable, residential Mechanical Ventilation with Heat Recovery unit. With Summer Bypass. Left hand spigots to atmosphere.
The Wireless enable kit allows the Kinetic to be set to boost or purge from a remote wireless switch. One switch is supplied with the kit. Up to three additional switches may be linked to the wireless receiver.
- Additional controller for Wireless enable kit and Wireless Transmitter Controller Receiver Kit
- A maximum of 4 controllers can be used per system
- Can be connected to other accessories (eg Humidistat) to send a boost signal wirelessly
IMPORTANT – This wireless controller is not compatible with any new Sentinel Multivent Ranges (white units). It is only compatible with these Sentinel Multivent part numbers; 445655, 445655A & 407849.
ISO 45% Coarse (G3) (2 pack). Formally known as G3, this filter will provide the minimum required filtration.
Replacement filter set comprising 2 filters for the Kinetic B, BH, E, V and Cooker Hood units. Installation instructions included.
ISO ePM10 50% (M5) Filter 1 Pack. Formally known as M5, this filter will remove smaller particles, including pollen.
Replacement filter comprising one supply filter for the Kinetic B, BH, E, V and Cooker Hood units. Pack contains one M5 pollen filter.
Raadpleeg de tab Downloads voor technische informatie
ESTIMATED RUNNING COSTS
Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model
Based on the inputted figures, estimated running costs would be:
Overview
Easy Installation
The Sentinel Kinetic models can be mounted vertically in a roof space, hallway cupboard or kitchen or within a kitchen cupboard. When mounted in an unheated area ducting and MVHR unit should be insulated. Ducting can be attached to the unit horizontally, vertically or both. Minimum internal depth of kitchen cupboard: V, B & BH models 290mm.
For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies.
Left (L) or right (R) hand installation. The unit is supplied with duct spigots to outside on the right hand side. These can be reversed on site by simplyremoving the control panel, rotating the unit 180 degrees and re-attaching the control panel.
Spigot Options
The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom ofthe unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation.
Integral Humidity Sensor (BH Models)
The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature.
Acoustic Solution
This product is available with acoustic enclosure. For more info please click here.
Technical
Click here for technical information, within our Online Product Selector. After, select your required fan model from the list to display Performance, Sound, Dimensions and Electrical Data.
Models
High efficiency, compact, recognised in SAP PCDB, residential Mechanical Ventilation with Heat Recovery unit (non-summer bypass model)
High efficiency, compact, SAP PCDB eligible, residential Mechanical Ventilation with Heat Recovery unit. With Summer Bypass and Integral Built-In Humidistat.
The Acoustic Enclosure reduces breakout noise from the MVHR unit, ensuring occupants are not disturbed by system noise throughout the dwelling. It features internal anti-vibration mounts which prevent vibration passing from the unit through the fabric of the building. The Acoustic Top Box reduces in-duct noise in living areas, bedrooms and wet rooms. It also provides a neat enclosure for ductwork at the point of installation.
The Acoustic Top Box reduces in-duct noise in living areas, bedrooms and wet rooms. It also provides a neat enclosure for ductwork at the point of installation.
The Acoustic Enclosure reduces breakout noise from the MVHR unit, ensuring occupants are not disturbed by system noise throughout the dwelling. It features internal anti-vibration mounts which prevent vibration passing from the unit through the fabric of the building.
High efficiency, compact, SAP Appendix Q eligable, residential Mechanical Ventilation with Heat Recovery unit. With Summer Bypass and Integral Built-In Humidistat.
The Acoustic Enclosure reduces breakout noise from the MVHR unit, ensuring occupants are not disturbed by system noise throughout the dwelling. It features internal anti-vibration mounts which prevent vibration passing from the unit through the fabric of the building. The Acoustic Top Box reduces in-duct noise in living areas, bedrooms and wet rooms. It also provides a neat enclosure for ductwork at the point of installation.
The Acoustic Top Box reduces in-duct noise in living areas, bedrooms and wet rooms. It also provides a neat enclosure for ductwork at the point of installation.
The Acoustic Enclosure reduces breakout noise from the MVHR unit, ensuring occupants are not disturbed by system noise throughout the dwelling. It features internal anti-vibration mounts which prevent vibration passing from the unit through the fabric of the building.
High efficiency, compact, SAP PCDB eligable, residential Mechanical Ventilation with Heat Recovery unit. With Summer Bypass.
High efficiency, compact, SAP PCDB eligable, residential Mechanical Ventilation with Heat Recovery unit. With Summer Bypass. Left hand spigots to atmosphere.
Accessories
The Wireless enable kit allows the Kinetic to be set to boost or purge from a remote wireless switch. One switch is supplied with the kit. Up to three additional switches may be linked to the wireless receiver.
- Additional controller for Wireless enable kit and Wireless Transmitter Controller Receiver Kit
- A maximum of 4 controllers can be used per system
- Can be connected to other accessories (eg Humidistat) to send a boost signal wirelessly
IMPORTANT – This wireless controller is not compatible with any new Sentinel Multivent Ranges (white units). It is only compatible with these Sentinel Multivent part numbers; 445655, 445655A & 407849.
ISO 45% Coarse (G3) (2 pack). Formally known as G3, this filter will provide the minimum required filtration.
Replacement filter set comprising 2 filters for the Kinetic B, BH, E, V and Cooker Hood units. Installation instructions included.
ISO ePM10 50% (M5) Filter 1 Pack. Formally known as M5, this filter will remove smaller particles, including pollen.
Replacement filter comprising one supply filter for the Kinetic B, BH, E, V and Cooker Hood units. Pack contains one M5 pollen filter.
Downloads
Useful links
-
Trade Counter
Click here -
Brochures
Click here -
Legislation
Click here -
Contact Us
Click here -
About Us
Click here -
Downloads
Click here