Lo-Carbon Quadra/SELV
Please click here for the latest product alternative
• Meets current Building Regulations Approved Document F & L for intermittent or continuous use
• Recognised in SAP PCDB - Low SFP on PCDB 0.38 W/l/s
• 100mm circular spigot for easy installation and replacement of any existing fan - flush or surface mount
• Filterless technology and maintenance free
• Lo-Carbon motors offering 90% energy savings and long life
• Motor cassette cartridge for simple replacement
• Integral daylogger (option on SELV models)
• 5 Year Motor Guarantee
• IPX4 rated - IPX7 rated (SELV)
• Suitable for wall, ceiling and panel mounting
Ventilation for any room
The Lo-Carbon Quadra offers a single fan suitable for surface or flush mounting. Low speed selectable between 6, 9 and 12l/s and high between 15, 30 and 60l/s all with through the wall or two ducted selections to ensure installed performance is met.
Lo-Carbon Quadra SELV
The Lo-Carbon Quadra SELV has been designed to meet building requirements where there is a need to fit in Zone 1 containing a fixed bath or shower according to IEE wiring regulations. The Lo-Carbon Quadra SELV can be safely installed within the spray area with the 24VDC Safety Isolating Power Supply situated away from the spray zone and out of reach of the person using the facility.
Discret
e With discrete aesthetics and low noise levels due to an accurately balanced impeller, it is also one of the most unobtrusive centrifugal kitchen fans available. The front cover design also provides no area for dirt to build up so it stays looking better for longer.

SELV Dual speed continuous running or intermittent to high speed. High speed via pullcord (on/off) or switch live (with overrun timer)

SELV Dual speed continuous running or intermittent to high speed. High speed via pullcord (on/off) or switch live (with overrun timer). Additional datalogger.

SELV Dual speed continuous running or intermittent. Adjustable Humidity sensor will boost the fan to (approx.) 50% of the high speed set at installation. High speed is activated via the integral pullcord or switch live (with overrun timer).

SELV Dual speed continuous running or intermittent to high speed. High speed via integral pullcord (on/off), integral adjustable humidity sensor or switch live (with overrun timer) Additional datalogger.

SELV Dual speed continuous running or intermittent to high speed. High speed via integral PIR sensor or switch live ( both with overrun timer)
Bezel, clips and 90deg duct elbow reduces the need to make good.
Filter (optional)


100mm Wall Fitting Kits (White) For installing into most walls using the telescopic liners supplied.

Raadpleeg de tab Downloads voor technische informatie
ESTIMATED RUNNING COSTS
Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model
Based on the inputted figures, estimated running costs would be:
Overview
Ventilation for any room
The Lo-Carbon Quadra offers a single fan suitable for surface or flush mounting. Low speed selectable between 6, 9 and 12l/s and high between 15, 30 and 60l/s all with through the wall or two ducted selections to ensure installed performance is met.
Lo-Carbon Quadra SELV
The Lo-Carbon Quadra SELV has been designed to meet building requirements where there is a need to fit in Zone 1 containing a fixed bath or shower according to IEE wiring regulations. The Lo-Carbon Quadra SELV can be safely installed within the spray area with the 24VDC Safety Isolating Power Supply situated away from the spray zone and out of reach of the person using the facility.
Discret
e With discrete aesthetics and low noise levels due to an accurately balanced impeller, it is also one of the most unobtrusive centrifugal kitchen fans available. The front cover design also provides no area for dirt to build up so it stays looking better for longer.
Technical
Models

SELV Dual speed continuous running or intermittent to high speed. High speed via pullcord (on/off) or switch live (with overrun timer)

SELV Dual speed continuous running or intermittent to high speed. High speed via pullcord (on/off) or switch live (with overrun timer). Additional datalogger.

SELV Dual speed continuous running or intermittent. Adjustable Humidity sensor will boost the fan to (approx.) 50% of the high speed set at installation. High speed is activated via the integral pullcord or switch live (with overrun timer).

SELV Dual speed continuous running or intermittent to high speed. High speed via integral pullcord (on/off), integral adjustable humidity sensor or switch live (with overrun timer) Additional datalogger.

SELV Dual speed continuous running or intermittent to high speed. High speed via integral PIR sensor or switch live ( both with overrun timer)
Accessories
Bezel, clips and 90deg duct elbow reduces the need to make good.
Filter (optional)


100mm Wall Fitting Kits (White) For installing into most walls using the telescopic liners supplied.
