Integra

• Heat recovery unit for smaller residential or commercial
  applications up to 180m2
• Up to 70% heat recovery
• Low power consumption
• Effective condensation control
• Summer mode
 

Select a product

The Integra heat recovery unit has been specially designed to provide ventilation for flats or rooms in residential, commercial, educational or leisure applications. Balanced ventilation is achieved by using nominal 100mm diameter rigid ducting.

Using a high performance, polymeric heat exchange cube, together with two powerful fans, the Vent-Axia Integra boasts a temperature efficiency of up to 70%.

The compact cube interleaves outgoing moist air with incoming fresh air, allowing the heat from one to warm the other without the two air streams mixing. Energy is saved on room heating, with no power being used by the cube itself.

Performance of Integra: Up to 49 l/s FID. Ideal for installation in the ceilings voids or cupboards.

The 150VA Transformer enables the selection of trickle settings to match dwelling volume.

 

PERFORMANCE:

Integra to be used with a 150VA Transformer for maximum controllabilty

Motor Speed 1 2 3 4 5 6
Volume l/s (FID) 15 21 27 32 37 49

DIMENSIONS:

Weight: 6.5kg

Power Consumption    
Speed 1 80V 32W
Speed 2 100V 47W
Speed 3 120V 64W
Speed 4 140V 81W
Speed 5 160V 99W
Speed 6 240V 182W
Image of 150VA Transformer
150VA Transformer
Surface Mounting Transformer with six voltage selections for trickle settings to match dwelling volume. Provides Boost/Trickle ventilation when used with humidity sensors or a manual switch. 95 x 225 x 75mm (H x W x D)
Stock Ref. No: 563538A
Price £181.73 (excl VAT)
Image of Integra
Integra

The Integra heat recovery unit has been specially designed to provide ventilation for flats or internal rooms in residential, commercial, educational or leisure applications. Balanced ventilation is achieved by using nominal 100mm diameter insulated flexible ducting. The unit is completely self contained and includes two integral centrifugal speed controllable fans plus a high efficiency polymeric heat exchanger. Using a high performance, polymeric heat exchange cube, together with two powerful fans, the Vent-Axia Integra boasts a temperature efficiency of up to 70%. The compact cube interleaves outgoing moist air with incoming fresh air, allowing the heat from one to warm the other without the two air streams mixing. Energy is saved on room heating, with no power being used by the cube itself. Performance of Integra: Up to 175.4m³/h FID. Ideal for installation in the ceilings voids or cupboards.

Stock Ref. No: 456864
Price £1159.16 (excl VAT)

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

The Integra heat recovery unit has been specially designed to provide ventilation for flats or rooms in residential, commercial, educational or leisure applications. Balanced ventilation is achieved by using nominal 100mm diameter rigid ducting.

Using a high performance, polymeric heat exchange cube, together with two powerful fans, the Vent-Axia Integra boasts a temperature efficiency of up to 70%.

The compact cube interleaves outgoing moist air with incoming fresh air, allowing the heat from one to warm the other without the two air streams mixing. Energy is saved on room heating, with no power being used by the cube itself.

Performance of Integra: Up to 49 l/s FID. Ideal for installation in the ceilings voids or cupboards.

The 150VA Transformer enables the selection of trickle settings to match dwelling volume.

 

Technical

PERFORMANCE:

Integra to be used with a 150VA Transformer for maximum controllabilty

Motor Speed 1 2 3 4 5 6
Volume l/s (FID) 15 21 27 32 37 49

DIMENSIONS:

Weight: 6.5kg

Power Consumption    
Speed 1 80V 32W
Speed 2 100V 47W
Speed 3 120V 64W
Speed 4 140V 81W
Speed 5 160V 99W
Speed 6 240V 182W

Models

Image of 150VA Transformer
150VA Transformer
Surface Mounting Transformer with six voltage selections for trickle settings to match dwelling volume. Provides Boost/Trickle ventilation when used with humidity sensors or a manual switch. 95 x 225 x 75mm (H x W x D)
Stock Ref. No: 563538A
Price £181.73 (excl VAT)
Image of Integra
Integra

The Integra heat recovery unit has been specially designed to provide ventilation for flats or internal rooms in residential, commercial, educational or leisure applications. Balanced ventilation is achieved by using nominal 100mm diameter insulated flexible ducting. The unit is completely self contained and includes two integral centrifugal speed controllable fans plus a high efficiency polymeric heat exchanger. Using a high performance, polymeric heat exchange cube, together with two powerful fans, the Vent-Axia Integra boasts a temperature efficiency of up to 70%. The compact cube interleaves outgoing moist air with incoming fresh air, allowing the heat from one to warm the other without the two air streams mixing. Energy is saved on room heating, with no power being used by the cube itself. Performance of Integra: Up to 175.4m³/h FID. Ideal for installation in the ceilings voids or cupboards.

Stock Ref. No: 456864
Price £1159.16 (excl VAT)

Downloads

Related Products

Useful links