Arterial Duct System
• Reduces installation time
• Can be applied in SAP as a rigid duct system
• Crush resistant semi-rigid duct
• Unique low-resistance manifolds
• Simple installation through joists
• Smooth inner surface with antistatic and antibacterial coating
• Combines the advantages of rigid ducting with the versatility of a semi-rigid system
Select a product
Arterial System
For use with MVHR systems, the Arterial air distribution system provides a flexible, highly robust solution, which can significantly reduce the installation time when compared to a standard system.
Rigid vs Semi-Rigid Systems
Both traditional duct types have limitations in modern construction.
Rigid systems: Passing rigid duct through a floor cassette at right-angles to the joists is time consuming and multiple connections increase the risk of leaking ductwork.
Semi-rigid Systems: It can often be difficult to accommodate two distribution boxes and multiple semi-rigid pipe runs in new buildings and the time saving advantages are soon overtaken by the additional cost of materials.
Reduced Installation Time
The Vent-Axia Arterial range combines the advantages of semi-rigid and traditional rigid ducting in one simple system. The system is independently tested and can be applied in SAP as a standard rigid system. Drops between floors to/from the MVHR unit remain in rigid PVC, having the advantage of low space usage and low cost. Traversing through joists in a floor cassette is much simpler and faster when using semi-rigid duct. The secret to the Arterial System is the unique low-resistance distribution plenum (Patent Pending) which is sited between joists allowing connection between semi-rigid and rigid sections.
DIMENSIONS:
External Dimensions (mm) | ||||
Stock Ref | Duct Size | A | B | C |
408872 | 220x90 to 78Ø | 94 | 258 | 150 |
External Dimensions (mm) | ||||
Stock Ref | Duct Size | A | B | C |
408874 | 220x90 to 78Ø | 98 | 226 | 66 |
External Dimensions (mm) | ||||
Stock Ref | Duct Size | A | B | C |
408875 | 220x90 to 78Ø | 98 | 226 | 26 |
External Dimensions (mm) | ||||
Stock Ref | Duct Size | A | B | C |
408873 | 220x90 to 78Ø | 98 | 226 | 26 |
External Dimensions (mm) | ||||
Stock Ref | Duct Size | A | B | C |
408885 | 120 to 78Ø | 129 | 105 | 129 |
Coil Height | |||||
Stock Ref | o/l Ømm | Length m | Coil Ømm | mm | kg |
406588 | 90/78 | 50 | 1130 | 250 | 19.5 |
External Dimensions (mm) | ||||
Stock Ref | o/l Ømm | A | B | C |
496741 | 90/78Ø | 119 | 226 | 280 |
Duct Size: 220x90 to 78Ø
Duct Size: 220x90 to 78Ø
Duct Size: 220x90 to 78Ø
Duct Size: 220x90 to 78Ø
Duct Size: 120 to 78Ø
Suitable for installation in concrete ceilings, suspended ceilings, internal walls, risers or frames, the Semi-Rigid Ducting is double-walled providing optimum flexibility. With an antistatic and antibacterial coating, the internal surface of the Semi-Rigid Ducting is smooth to ensure minimal resistance to airflow. Normally flammable construction material class E, according to EN-13501-1.
Connect 90mm semi-rigid ducting to 100mm fans using this elbow bend. This elbow socket is ideal for use when ceiling-mounting a fan.
Flow rate (l/s) |
8 |
13 |
21 |
29 |
37 |
45 |
53 |
61 |
Pressure drop (Pa) |
3.6 |
9.6 |
25.3 |
48.5 |
79.1 |
117.3 |
162.9 |
216.0 |
PDF DOWNLOADS:
Raadpleeg de tab Downloads voor technische informatie
ESTIMATED RUNNING COSTS
Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model
Based on the inputted figures, estimated running costs would be:
Overview
Arterial System
For use with MVHR systems, the Arterial air distribution system provides a flexible, highly robust solution, which can significantly reduce the installation time when compared to a standard system.
Rigid vs Semi-Rigid Systems
Both traditional duct types have limitations in modern construction.
Rigid systems: Passing rigid duct through a floor cassette at right-angles to the joists is time consuming and multiple connections increase the risk of leaking ductwork.
Semi-rigid Systems: It can often be difficult to accommodate two distribution boxes and multiple semi-rigid pipe runs in new buildings and the time saving advantages are soon overtaken by the additional cost of materials.
Reduced Installation Time
The Vent-Axia Arterial range combines the advantages of semi-rigid and traditional rigid ducting in one simple system. The system is independently tested and can be applied in SAP as a standard rigid system. Drops between floors to/from the MVHR unit remain in rigid PVC, having the advantage of low space usage and low cost. Traversing through joists in a floor cassette is much simpler and faster when using semi-rigid duct. The secret to the Arterial System is the unique low-resistance distribution plenum (Patent Pending) which is sited between joists allowing connection between semi-rigid and rigid sections.
Technical
DIMENSIONS:
External Dimensions (mm) | ||||
Stock Ref | Duct Size | A | B | C |
408872 | 220x90 to 78Ø | 94 | 258 | 150 |
External Dimensions (mm) | ||||
Stock Ref | Duct Size | A | B | C |
408874 | 220x90 to 78Ø | 98 | 226 | 66 |
External Dimensions (mm) | ||||
Stock Ref | Duct Size | A | B | C |
408875 | 220x90 to 78Ø | 98 | 226 | 26 |
External Dimensions (mm) | ||||
Stock Ref | Duct Size | A | B | C |
408873 | 220x90 to 78Ø | 98 | 226 | 26 |
External Dimensions (mm) | ||||
Stock Ref | Duct Size | A | B | C |
408885 | 120 to 78Ø | 129 | 105 | 129 |
Coil Height | |||||
Stock Ref | o/l Ømm | Length m | Coil Ømm | mm | kg |
406588 | 90/78 | 50 | 1130 | 250 | 19.5 |
External Dimensions (mm) | ||||
Stock Ref | o/l Ømm | A | B | C |
496741 | 90/78Ø | 119 | 226 | 280 |
Models
Duct Size: 220x90 to 78Ø
Duct Size: 220x90 to 78Ø
Duct Size: 220x90 to 78Ø
Duct Size: 220x90 to 78Ø
Duct Size: 120 to 78Ø
Suitable for installation in concrete ceilings, suspended ceilings, internal walls, risers or frames, the Semi-Rigid Ducting is double-walled providing optimum flexibility. With an antistatic and antibacterial coating, the internal surface of the Semi-Rigid Ducting is smooth to ensure minimal resistance to airflow. Normally flammable construction material class E, according to EN-13501-1.
Connect 90mm semi-rigid ducting to 100mm fans using this elbow bend. This elbow socket is ideal for use when ceiling-mounting a fan.
Flow rate (l/s) |
8 |
13 |
21 |
29 |
37 |
45 |
53 |
61 |
Pressure drop (Pa) |
3.6 |
9.6 |
25.3 |
48.5 |
79.1 |
117.3 |
162.9 |
216.0 |