AirTrack Duct Air Heaters

The Vent-Axia range of sheathed element air duct heaters with built in control system provide a safe method of air heating
which is economical to install and operate.

Circular Duct Air Heaters comprising of electric resistance elements, mounted in a pregalvanised steel casing. Every heater is fitted with a high temperature safety cut out operating at 120°C complete with push button manual reset.

Available in 100, 125, 150, 200, 250, 315 and 400mm diameter sizes. The air velocity across the heater elements must be greater than 2m/s and installed a minimum distance of one metre from the exhaust outlet of the fan unit. All fans supplying heaters above 6 kW should be fitted with an off-delay timer to dissipate any residual heat when the system is shut down.

Duct heaters must be used in conjunction with a fan heater controller and a temperature thermostat (room or duct) and an air pressure/flow switch.

DIMENSIONS:

Stock Ref No Øa b c kg
10531100T1 100 160 117 3
10531125T1 125 172.5 117 3.8
10531150T1 150 185 125 4
10531200T1 200 210 180 6
10531250T1 250 235 180 7.5
10531315T1 315 267.5 180 8.2
10531315T3 315 267.5 180 8.5
10531400T3 400 310 180 9.2
10531500T3 500 360 180 10
 

 

Raadpleeg de tab Downloads voor technische informatie

 

 

ESTIMATED RUNNING COSTS

Calculate estimated running costs for this product using the tool below.
For average costs*, leave the default values in place or enter your own figures in the boxes to recalculate.
Where a product has multi speeds, a typical installation has been used for the below calculations. *Running cost does not include the use of the heater on the heater model


pence
(Your current electricity cost in pence per hour. This will be listed on your electric bill)
hours
(The average number of hours per day fan to run in Trickle mode)
hours
(The average number of hours per day fan to run in Boost mode)

Based on the inputted figures, estimated running costs would be:

Overview

The Vent-Axia range of sheathed element air duct heaters with built in control system provide a safe method of air heating
which is economical to install and operate.

Circular Duct Air Heaters comprising of electric resistance elements, mounted in a pregalvanised steel casing. Every heater is fitted with a high temperature safety cut out operating at 120°C complete with push button manual reset.

Available in 100, 125, 150, 200, 250, 315 and 400mm diameter sizes. The air velocity across the heater elements must be greater than 2m/s and installed a minimum distance of one metre from the exhaust outlet of the fan unit. All fans supplying heaters above 6 kW should be fitted with an off-delay timer to dissipate any residual heat when the system is shut down.

Duct heaters must be used in conjunction with a fan heater controller and a temperature thermostat (room or duct) and an air pressure/flow switch.

Technical

DIMENSIONS:

Stock Ref No Øa b c kg
10531100T1 100 160 117 3
10531125T1 125 172.5 117 3.8
10531150T1 150 185 125 4
10531200T1 200 210 180 6
10531250T1 250 235 180 7.5
10531315T1 315 267.5 180 8.2
10531315T3 315 267.5 180 8.5
10531400T3 400 310 180 9.2
10531500T3 500 360 180 10
 

Downloads

Related Products

Useful links